Advertisement
Assembly
Install Leg
1. Slide leg (M) onto sprayer frame (F).
2. Install carriage head bolts and hex nuts (S) and
torque to 26 to 32 in-lb (2.9 to 3.6 N•m).
F
ti17727a
NOTICE
Do not over-tighten. Plastic will become stripped
and damage to sprayer will occur.
3A1964A
Replace Shroud
1. Install ON/OFF switch (L) into left shroud (K).
2. Install power cord (N) into recess on left shroud (K).
3. Reassemble both shrouds (G and K).
4. Install side shroud screws (E) (T-20 Torx). Torque to
20 to 25 in-lb (2.3 to 2.8 N•m).
5. Install 4 front cover screws (B) (T-30 Torx). Torque to
26 to 32 in-lb (2.9 to 3.6 N•m).
S
M
E
G
N
Assembly
B
L
K
ti17751a
3
Advertisement
