Graco 24K632 Kit Instructions page 2

Disassembly
Disassembly
Remove Shroud
1. Unplug electrical cord and perform Pressure Relief
Procedure (see cover).
2. Remove side shroud screws (E) (T-20 Torx).
NOTE: Number of side shroud screws may vary
from image shown.
3. Remove 4 front cover screws (B) (T-30 Torx).
4. Remove right shroud (G).
5. Remove left shroud (K).
6. Remove ON/OFF (L) switch from left shroud (K).
E
G
N
2
For Metal Legs:
1. Remove hex head bolts (S). NOTE: Number of hex
2. Remove leg (M) from sprayer frame (F).
S
B
For Plastic Legs:
1. Remove nuts (R) and bolts (T).
2. Remove leg (W) from frame (F).
L
K
ti17751a
head bolts will vary depending on model.
F
ti17728a
R
F
M
T
W
ti17727a
3A1964A