Troubleshooting - Clarke RS-16 HDTR Operator's Manual

TROUBLESHOOTING

MACHINE WOBBLES DURING OPERATION
• Defective pad... one side is more dense than the other.
• Machine left sitting on pad for extended period of time
causing pad to "take a set".
• Pad not "seated" properly into pad holder bristles.
• Warped block on brush or padholder - replace.
MACHINE DOES NOT RUN
• Check plug for proper connection - on machine and at wall
outlet.
• Check building circuit breaker.
• Call for service.
American Sanders Operator's Manual (EN) - RS-16 HDTR
®
Clarke
ENGLISH
EN
- 9 -