Transmittable Documents - Sharp FO-5500 Service Manual

FO-5500U/C

[3] Transmittable documents

1. Document Sizes
width
Normal size
length
(Max.)
Letter size
(Min.)
128mm
148mm 216mm
[Normal size]
Use document carrier sheet for smaller documents.
* With special sizes, only one sheet can be fed into the machine at
a time. Insert next page into feeder as current page is being
scanned.
2. Paper Thickness & Weight
Indication
Weight Japanese indication
Size 4 × 6
indication
Metric system
indication
American indication
LB system indication
Thickness Metric system
indication indication
Inch system indication 0.0024"
Document Document size
size Range
Number of Document size
ADF sheets Weight
Paper Kind
quality
3. Document Types
•
Normal paper
Documents handwritten in pencil (No. 2 lead or softer), fountain
pen, ball point pen, or felt-tipped pen can be transmitted.
Documents of normal contrast duplicated by a copying machine
can also be transmitted.
•
Diazo copy (blueprint)
Diazo copy documents of a normal contrast may be transmitted.
•
Carbon copy
A carbon copy may be transmitted if its contrast is normal.
5.83" – 8.5" (148 – 216 mm)
5.04" – 11" (128 – 279 mm)
(Max.)
432mm
279mm
216mm
[Special size]
Product specifications
Lower Limit Upper Limit
45kg paper 70kg paper
2 2
52g/m 80g/m
14 LB 20 LB
0.06mm 0.1mm
0.0035"
(148mm × 128mm) ~
W letter (279.4mm × 432mm)
A4 (210mm × 297mm)
Letter (216mm × 279mm)
B6 ~ Letter/A4 size 50 sheets
B4 size/Legal 20 sheets
W letter size 1 sheet
2
90 kg (104g/m ) or more
2
135 kg (157g/m ) or less 1 sheet
Paper of fine quality/bond paper/Kent
paper
4. Cautions on Transmitting Documents
•
Documents written in yellow, greenish yellow, or light blue ink
cannot be transmitted.
•
Ink, glue, and correcting fluid on documents must be dry before the
documents can be transmitted.
•
All clips, staples and pins must be removed from documents be-
fore transmission.
•
Patched (taped) documents should be copied first on a copier and
then the copies used for transmission.
•
All documents should be fanned before insertion into the feeder to
prevent possible double feeds.
5. Automatic Document Feeder Capacity
Number of pages that can be placed into the feeder at anytime is as
follows:
Normal size: max. 50 sheets (14 lbs – 20 lbs)
Special size: single sheet only (manual feed)
•
NOTES: When you need to send or copy more pages than the
feeder limit, place additional pages in feeder when last
page in feeder is being scanned.
•
Place additional pages carefully and gently in feeder.
If force is used, double-feeding or a document jam may
result.
6. Readable Width & Length
The readable width and length of a document are slightly smaller than
the actual document size.
Note that characters or graphics outside the effective document scan-
ning range will not be read.
•
Readable width
8.3" (208 mm) max.
•
Readable length
This is the length of the document sent minus 0.16" (4 mm) from the
top and bottom edges.
1 – 4
Readable width
4mm
Readable length
4mm