Wiring The System - Infinity Minuette L-MPS Owner's Manual

WIRING THE SYSTEM

After placing the Miiuette L-MPS speakers, you are ready to wire
your speakers. First turn off all audio system power. Use high-
quality speaker wire (#16 gauge
tions. Consult the owner's manuals that
amplifier,
receiver,
or telebision to confirrn
Miiuette L-MPS speakers have spring-loaded terminals for easy
wiring. Observe polarities when making speaker connections,
as shown in Rgure 8. Connect each + terminal on the back of
of
FIGURE 8.
An example
to an A/V {audiduideo) receiuer in a system.
4
or
heavier) to make your connec-
included with
were
connection procedures.
+ Surround
bow to interconnect L-MPS speakers
the amplifier, receiver, or television to the respective + (red)
the - (black) terminal in the same way.
IMPORTANT! Do not reuerse polarities (i.e., + to - or
poor imaging and diminished bass response.
Preamp Outputs Surround -
L
Stereo RCA Cable
Riaht