Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Infinity Theater Pac US-1
Summary of Contents for Infinity Theater Pac US-1
- Page 1 Theater Pac 2-Way Universal-Mounting Satellite Loudspeakers Owner’s Manual ®...
-
Page 2: Tools And Supplies
NTRODUCTION NIVERSAL The Infinity US-1 is a compact, efficient 2-way universal satellite speaker system that is ideal for reproducing home-theater sound for front or rear channels. With their versatile design, US-1 ATELLITE YSTEM speakers can be placed virtually anywhere on shelves or stands, or mounted on a wall or ceiling, using the integral 4-way mounting bracket. -
Page 3: Your System
INFINITY POWERED US-1 speakers are used to reproduce SUBWOOFER TELEVISION (optional) sound for the front, center and surround channels. An Infinity powered subwoofer (optional) is shown providing extra bass for effects and music. US-1 SPEAKER US-1 US-1 SPEAKER For Left Channel... - Page 4 US-1 HELF LACEMENT OF ERTICAL OSITION US-1 speakers can be positioned vertically in two positions on a shelf or stand, as shown in Figure 2. Set each US-1 flat, with the logo at the bottom and the bracket facing inward. You can also push the speakers gently back for a 20°...
- Page 5 NOTE: The customer is responsible for US-1 OUNTING THE the correct selection and use of mounting hardware (available through hardware US-1 speakers can be wall- or ceiling-mounted, as shown in Figures 4 and 5. You can mount the stores) that will ensure the proper and speakers with #6 wood screws (not included), using the built-in mounting bracket.
- Page 6 ORIZONTAL OUNTING For horizontal mounting, fasten the #6 wood screws (not included) to a wall stud, leaving a 3⁄16" clearance between the base of the screw head and the wall. If desired, loosen the bracket screw, adjust the bracket angle, and tighten the bracket screw. NOTE: You may want to route the wires before tightening the bracket screw (see Figure 7 on page 7).
- Page 7 IRING THE YSTEM OWER After placing the speakers, you are ready to connect your system. First turn off all audio system power. Use high-quality speaker wire to make your connections. For speaker connections, use at least #18 gauge speaker wire (or #16 for runs over 25 feet) with polarity coding. The side of the wire with a ridge or other coding is usually considered positive polarity (i.e., + ).
-
Page 8: Operating The System
• If only one channel is distorted, switch the left and right speaker leads at the receiver. • If the distortion moves to the other speaker, the problem is not in the speaker. • If you need further assistance, contact your local Infinity retail dealer. 8 US-1 Theater Pac – Owner’s Manual... -
Page 9: Drive Units
– US-1 PECIFICATIONS ERFORMANCE Frequency Range: 70 ~ 20,000Hz Sensitivity: 86dB spl @ 1m/2.83 V (anechoic conditions) Ω Impedance: nominal Maximum Peak Output: 104dB (spl on program) Recommended Maximum 10 ~ 100W Amplifier Power: RIVE NITS Low/Mid Frequency: One 4" (100mm) magnetically shielded, polypropylene cone High Frequency: One 1⁄2"... - Page 10 US-1 M OUNTING EMPLATE Bracket Crosshole 2.52" (64 mm) Bracket Crosshole 10 US-1 Theater Pac – Owner’s Manual...
- Page 11 Declaration of Conformity We, Infinity Systems A/S Kongevejen 194B DK-3460 Birkerød DENMARK declare in own responsibility, that the products described in this owner’s manual are in compliance with technical standards: EN 50081-1:1992 EN 50082-1:1992 Steen Michaelsen Infinity Systems A/S Birkerød. DENMARK. 3/99...
- Page 12 Infinity continually strives to update and improve existing products, as well as create new ones. The specifications and construction details in this and related Infinity publications are therefore subject to change without notice. ©1999 Infinity Systems, Inc., 250 Crossways Park Drive, Woodbury, NY 11797 USA (800) 553-3332 www.infinitysystems.com...
Need help?
Do you have a question about the Theater Pac US-1 and is the answer not in the manual?
Questions and answers