Disassembly Of Main P.c.b - Panasonic SA-AKX36PH Service Manual

10.11. Disassembly of Main P.C.B.

• Refer to "Disassembly of Top Cabinet".
• Refer to "Disassembly of Rear Panel".
Step 1 Detach 5P Cable at the connector (CN2002) on Main
P.C.B..
Step 2 Detach 30P FFC at the connector (CN2000) on Main
P.C.B..
Step 3 Detach 13P Cable at the connector (CON2) on SMPS
Module.
Step 4 Detach 10P FFC at the connector (CN8251) on Main
P.C.B..
Step 5 Detach 24P FFC at the connector (FP8201) on Main
P.C.B..
Step 6 Detach 2P Wire at the connector (CN1001) on Main
P.C.B..
Step 7 Remove 2 screws.
Step 8 Remove the Main P.C.B..
Caution: During assembling, ensure that Main P.C.B. is
seated properly through the located & fully guided.
37