Download Print this page

Installation - Jobsite LSS-10 Installation & User Manual

10" & 12" powered subwoofers for powerful bass in home theater or music systems

Hide thumbs Also See for LSS-10:

Datasheet (2 pages)

Table Of Contents

Table of Contents

INSTALLATION

Signal Connectors and Power Controls

The LSS-10 and LSS-12's signal connectors and power controls are located on the unit's rear

panel, as shown in Figure 1. They function as follows:

NOTE: See Applications starting on page 7 for detailed wiring connections for

your application.

��

Figure 1. The LSS-12's rear panel contains the subwoofer's signal connectors and

power controls. (LSS-12 Shown - LSS-10 similar)

TRIGGER: For external power triggering, use a mini (3.5 mm) mono plug to connect the IN

jack to a power on/off trigger signal from a home theater surround sound processor or

other voltage. Source power on is 3 to 30 Vdc (or Vac). Power off is 0 Vdc (or Vac). Use

the OUT jack to pass the TRIGGER signal (at the same voltage level of the trigger input)

to another LSS-10 and LSS-12 or other equipment in your system. THIS JACK SHOULD

NOT BE USED TO POWER OTHER EQUIPMENT.

NOTE: For a system not equipped with a power trigger output, consider using a 12-volt

power supply as a trigger signal that is activated via a switched AC outlet on the receiver.

DS00490ACN-0 LSS-10_12.indd

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

�

5/23/06

2:12:56 PM

Table of Contents

Show Quick Links

Hide quick links:

Table of Contents

This manual is also suitable for:

Lss-12

Installation - Jobsite LSS-10 Installation & User Manual

INSTALLATION

Hide quick links:

Related Manuals for Jobsite LSS-10

Related Products for Jobsite LSS-10

This manual is also suitable for:

Table of Contents