Environmental Specifications; Electrical Specifications; Agency Compliance; Packaging Specifications - JMR electronics 1U SCSI JBOD Installation Manual

4-bay rackmount enclosure
Table of Contents

Advertisement

Environmental Specifications

Operating Temperature: 5°C to 40°C (41°F to 104°F)
Storage Temperature:
Maximum ambient temperature is dependent on the recommended temperature to
meet the MTBF rating as specified by the manufacturer of the installed devices.

Electrical Specifications

AC Inlet Type: IEC320/EN60320
Power Cord: NEMA5-15P
Power Supply: Auto-switching for 110/220V operation

Agency Compliance

enclosures have been designed and built to comply with the FCC
Class A, UL, CSA/TUV, CE, and C-Tick standards. For more information on
FCC Class A compliance, see page 2.

Packaging Specifications

packaging has been designed to be reusable and recyclable.
Drives may be installed and shipped in the canisters as long as the canisters are in
their original packaging location and are not installed in the enclosure. Shipping
the unit with canisters and/or power supplies installed in the enclosure may cause
damage to the enclosure or to the drives and will void the warranty.
SAFETY TIP: Reshipping the enclosure with canisters, drives, or power
supplies installed in the enclosure may cause damage to these
components and will void the warranty
SICHERHEITSHINWEIS: Der Versand des Gehäuses mit eingebauten
Einschüben, Platten und Netzteilen kann zur Beschädigung dieser
Komponenten führen und somit den Garantieanspruch gefährden.
Packaging complies with ISTA (International Safe Transit Association) standards
and has been ISTA certified.
Each canister is pre-packaged in an anti-static bag. Do not throw the packaging
away if the product is intended for re-shipping. When transporting or shipping a
JMR approved shipping container must be used.

Disclaimer

The original product packaging has been tested and is safe under normal shipping
circumstances.
Reshipping the product without using the original product
packaging will void the warranty. Do not ship the unit with canisters and/or
power supplies installed in the enclosure as this will void the warranty and could
cause damage to the unit and drives. The canisters should be packaged separately
within the product packaging, as provided.
SCSI JBOD Installation Guide Rev A
0°C to 65°C (32°F to 149°F)
2-2

Advertisement

Table of Contents
loading

Table of Contents