Rail Mounting Kit Hardware; Spare Hardware Parts; Rail Installation - JMR electronics 1U SCSI JBOD Installation Manual

Rail Mounting Kit Hardware

• Eight #10-32 Screws
• Four each #8-32 Screws/Washers/Nuts

Spare Hardware Parts

Check with a JMR Sales Representative for pricing and availability of spare
hardware parts.
Description JMR Part Number
#10-32 Screw HDS-01580
#8-32 Screw HDS-00350
#8-32 Nut HDN-00040
#8-32 Washer HDW-00080

Rail Installation

Main Rail
Front
1. Affix the extension brackets to the main rail using the #8-32
screw/washer/nut assemblies. Adjust to the correct length for the cabinet
depth being used.
Two #10-32 Screws at
Front of
Rackmount
Unit
SCSI JBOD Installation Guide Rev A
Expansion Rail
each end
Rear
Two #8-32
Screws/Washers/Nuts
6-2