Power Supply Removal/Insertion; Blower Removal/Insertion - JMR electronics 1U SCSI JBOD Installation Manual

4-bay rackmount enclosure
Table of Contents

Advertisement

This section covers operation of the power supply and blowers.

Power Supply Removal/Insertion

In the 1U04 SCSI JBOD enclosure, the power supply is not a field replaceable
unit (FRU).
Therefore, if you have a power supply malfunction, contact
Technical Support at JMR Electronics. See
Chapter 7
for contact information.

Blower Removal/Insertion

In the 1U04 SCSI JBOD enclosure, there are two blowers that are not field
replaceable units. If a blower malfunction occurs, please contact JMR Electronics.
See
Chapter 7
for contact information.
5-1
SCSI JBOD Installation Guide Rev A

Advertisement

Table of Contents
loading

Table of Contents