Starting The Timer - pro master Timer Remote User Manual

Starting the Timer

Press the START/STOP button. The timer will start and "TIMER ACTIVE" will flash in the control
panel. Between shots, the control panel will show the time remaining until the next photograph is
taken. If the speaker is ON, a beep will sound three times at ONE-SECOND intervals before the
shutter opens.
While the shutter is opened, the control panel will show the time remaining until the shutter closes,
and the release lamp and "RELEASE" indicator will flash at ONE-SECOND intervals. The number of
shots remaining will be updated each time a photograph is taken.
The Speaker and Release Lamp
The following illustration shows when a beep will sound (
of 5s, and exposure time of 4, and an interval of 9s.
End Shooting
Shooting will end automatically when the selected number of shots has been taken. To end shooting
before all photographs have been taken, press the START/STOP button.
1. Flashes while timer is active
2. Between shots: Time remaining until next
shot. While shutter is open: Time remaining
until shutter closes.
3. Number of shots remaining
4. Flashes while shutter is open
) and the release lamp flash ( ) with a delay