Table of Contents
Advertisement
5. Speaker
To ensure correct operation, be sure to choose an interval of at least two seconds longer than the
exposure time. When using autofocus, set the delay to two seconds or more and choose an interval
at least two seconds longer than the exposure time to ensure that the camera has time to focus.
When using long exposure noise reduction, the interval should be at least twice the exposure time.
Intervals of 00:00:00 will automatically be reset to 00:00:01 when the SET button is pressed to put
settings into effect.
To set the number of shots to - - (unlimited), select 1 and press the arrow button down or select 399
and press the arrow button up.
After adjusting any setting, press the SET button to ENABLE the new setting. A beep will sound (if
the speaker is ON) and the "SET" icon indicator will go out.
Advertisement
Table of Contents
