Setting And Using Camera Presets - Polycom Remote Control General Operating Instructions

2. Press Camera on the remote control. Then press the number for the camera or
other video source you want to select at the near or far site. For example, press 1 to
select the main camera. The image from the camera or video source you selected
appears on the screen.
Press the arrow buttons on the remote control to move the camera up, down, to the
left, or to the right.
Press Zoom to zoom out or in.

Setting and Using Camera Presets:

To store a preset:
1. Adjust the camera's position:
• Press the arrow buttons on the remote control to move the camera up,
down, to the left, or to the right.
• Press
2. Press Preset on the remote control.
3. Press and hold a number to store the preset position. To store a double-digit
preset (10-99), hold the second number down.
Note: Any existing preset stored at the number you enter is replaced.
To view your presets:
Press Preset on the remote control.
Note: Icons for presets 0-9 are shown on the screen. The colored icons indicate stored camera positions,
To move the camera to a preset:
1. If a call is connected, press
2. Press a number from 0 to 99.
Note: The camera moves to the preset position for the camera or other video source.
To delete all presets:
1. If a call is connected, press
2. Press Preset on the remote control.
Zoom to zoom the camera out or in.
and the gray icons indicate available presets
Near