Advertisement
3.1.3 Removing the front panel
(Fig.4 to 6)
(1) Disconnect the card wire from the connector
CN360
on the regulator board. (See the Fig.4)
(2) Disconnect the card wire from the connector
main board. (See Fig.4)
(3) Disconnect the connector wire from the connector
on the main board. (See Fig.4)
(4) Disconnect the connector wire from the connector
on the video board. (See Fig.4)
(5) Remove the two screws E and two screws F attaching the
front panel. (See Fig.5)
(6) Remove the hook a. (See Fig.5)
(7) Remove the hook b and then removing the front panel.
(See Fig.6)
3.1.4 Removing the rear cover
(Fig.1)
(1) Remove the two screws G attaching the rear cover.
1-10 (No.MB505)
CN359
and
CN360
CN405
CN760
on the
CN713
CN405
E
CN713
CN359 CN706
Fig.4
Fig.5
hook b
Fig.6
hook a
F
Advertisement
