Panasonic KX-T0141 Quick Installation Manual page 8

1 Overview
PBX
KX-NCP1000
Required Distances between Equipment
CAUTION
Maintain the distances listed below between equipment in order to prevent noise, interference or the
disconnection of a conversation. (The distance may vary depending on the environment.)
CS and office equipment such as a computer, telex, fax
machine, etc., or microwaves
CS and PS
Each CS
Each PS
PBX and CS
Notice
The required distance between CSs may vary depending on the environment of the installation site and
conditions in which the wireless system is used. Conduct a site survey to determine the appropriate
distance.
RF Specification
Item
Frequency Band
Transmission Output
CAUTION
•
The CS should be kept free of dust, moisture, high temperature (more than 40 °C [104 °F]), low
temperature (less than 0 °C [32 °F]), and vibration, and should not be exposed to direct sunlight.
•
The CS should not be placed outdoors (use indoors).
•
The CS should not be placed near high-voltage equipment.
•
The CS should not be placed on a metal object.
•
Systems using 2.4 GHz ISM (Industrial, Scientific and Medical) band may interfere with the Panasonic
wireless system. Examples of such systems are cordless telephones, wireless LAN, Home RF,
microwave ovens and other ISM devices. These systems may cause minor noise.
Notice
Please take into consideration the distance between the CSs when site planning. Please consult a certified
dealer for details.
8 Quick Installation Guide
Connected via
KX-T0151
•
DHLC card
•
DLC card
Equipment
2400 MHz to 2483 MHz
Peak 0.25 W
Maximum Number
KX-TDA0152
8 -
Distance
More than 2 m (6 ft 7 in)
More than 1 m (3 ft 3 in)
More than 15 m (49 ft)
More than 0.5 m (1 ft 8 in)
More than 2 m (6 ft 7 in)
Description
KX-T0141 KX-TDA0142
8 -
Document Version 2009-12