Sony MXD-D40 Service Manual page 35

Adjustment flow
Start
Replace IC195
NO
Replace OP or IC195
NO
Replace IC101, IC195, or D101
NO
Replace OP, IC190, or IC195
NO
Replace OP, IC102, IC190,
or IC195
NO
Replace OP, IC101, IC151,
or IC195
NO
Replace OP
NO
Replace the spindle motor
NO
6-4. Auto Check
(See page 38)
End adjustments
After turning off and then on the power,
YES
initialize the EEPROM
For details, refer to 10. WHEN MEMORY NG IS
DISPLAYED (See page 32)
YES 7. INITIAL SETTING OF ADJUSTMENT VALUE
(See page 40)
YES
9. TEMPERATURE COMPENSATION OFFSET
ADJUSTMENT (See page 40)
YES
10. LASER POWER ADJUSTMENT (See page 40)
YES
11. Iop NV SAVE (See page 41)
12. TRAVERSE ADJUSTMENT (See page 41)
YES
13. FOCUS BIAS ADJUSTMENT (See page 42)
16. AUTO GAIN CONTROL OUTPUT LEVEL
ADJUSTMENT (See page 43)
YES
OP change in Err Display mode
Iop write
YES
Spindle change in Err Display mode
MXD-D40
• Abbreviation
OP: optical pick-up
35