Table of Contents
Advertisement
USING THE TIMER
This function sets the Rice Cooker to automatically finish cooking by a specific time.
Once set, the timer settings are stored in "Timer 1
The initial settings are 6:00 for "Timer 1", 18:00 for "Timer 2".
SETTING A SPECIFIC TIME
1
Press the
button to select "Timer 1" (or "Timer 2") .
The preset time for "Timer 1" and the START / REHEAT light will blink.
Press the button again and the preset time for "Timer 2" will appear.
2
Press the
button to select the desired Menu.
The Timer function is not available for QUICK, MIXED, SWEET, CAKE and STEAM menu settings.
3
3
Press the Time Setting
or
button: Each press advances the time in 10-minute increments.
button: Each press reverses the time in 10-minute increments.
Press and hold the button to quickly forward the time in
10-minute increments.
You do not need to set the time again when using the
same settings.
4
Press the
button.
The START / REHEAT light will turn off and the set time of 7:30 will be
displayed and the TIMER light will turn on with a melody/beep sound.
The START / REHEAT button must be pressed to set the TIMER.
Suggested lengths for the Timer setting:
Menu Selections
1.0L model
White Rice / Sushi Rice
1 hour 5 minutes
Porridge
1 hour 10 minutes
Brown Rice
1 hour 55 minutes
NOTE:
To cancel the Timer setting, press the CANCEL button.
Press the
or
button to check the current time.
Do not use the Timer function if you are adding ingredients and/or seasonings to the rice. Ingredients may spoil or seasonings may settle to the
bottom of the Inner Cooking Pan and your results may not be satisfactory.
The rice may be softer in texture when cooking with the Timer function.
The remaining time till cooking completion will not be displayed when the Timer is set.
If the Timer is set for less than the suggested length above, a beep will sound and the Rice Cooker will start cooking immediately.
Be sure to set the Timer for less than 13 hours, especially during summer, to prevent the soaked rice from spoiling due to the higher room
temperature.
Do not use the Timer when cooking Germinated Brown Rice as it tends to absorb too much water and your results may not be satisfactory.
Cooking may not complete at the set time if the temperature of the room or water is too low. In addition, the cooking time may be affected by the
amount of water or voltage.
Set the clock to the current time before
setting the Timer function.
pg.13
" and "Timer 2
".
Blinks
Set time
button to set a specific time to finish cooking.
The time you
wish to complete
cooking.
e.g.7:30
Turns on
Timer Settings
1.8L model
13 hours
1 hour 10 minutes
13 hours
13 hours
1 hour 15 minutes
13 hours
13 hours
2 hours
13 hours
HOW TO SET THE CLOCK / SOUND SIGNALS AND HOW TO CHANGE THEM
HOW TO SET THE CLOCK
The clock is displayed in 24 hours (militarytime). Although the clock is set before shipment from the factory, certain conditions
such as room temperature may cause it to display an inaccurate time.
If the clock is inaccurate, set the correct time as shown below.
If the clock is inaccurate, cooking will not be completed at the time you set for the Timer.
The clock cannot be changed during Cooking, Reheating, Regular Keep Warm, Extended Keep Warm or Timer Cooking.
e.g.: If the current time is 15:01 but displays 14:56.
1
Set the Inner Cooking Pan and plug in the Power Cord.
1) Insert the Power Cord into the Main Body securely.
2) Insert the Power Plug into an electrical outlet.
2
Press the Time Setting
Time Setting and adjust the clock to the current time.
The time display will start to blink.
button: Each press advances the time in 1-minute increments.
button: Each press moves the clock in reverse by 1 minute.
Press and hold either button to quickly adjust in 10-minute increments.
3
The time display will stop blinking after 3 seconds,
indicating the Time Setting is completed.
If the time display still does not show the current time, repeat Step
SOUND SIGNALS AND HOW TO CHANGE THEM
This product is equipped with a Sound Signal function, which will inform you when the Rice Cooker begins cooking, when the
Turns off
Timer is set, or when cooking has completed. You can choose the Sound Signals from the following.
Types of Sound Signals:
Types of Sound
Signals and their
meanings
Indication
Cooking has Begun :
Timer is Set:
Cooking/Reheating has Completed:
HOW TO CHANGE THE SOUND SIGNAL:
1
Set the Inner Cooking Pan and plug in the Power Cord.
1) Insert the Power Cord into the Main Body securely.
2) Insert the Power Plug into an electrical outlet.
2
Hold the
button for more than 3 seconds.
3
The setting is completed when the desired Sound Signal is heard.
WHEN CHANGING THE SOUND SIGNAL:
Each time the TIMER button is held for more than 3 seconds, the Sound Signal will change.
Melody:
It will play Amaryllis
when the sound setting is
completed.
The selected Sound Signal is stored and will remain even if the Rice Cooker is unplugged.
Blinks
or
button to initiate the
Time correction is completed
Stops
blinking
2
to readjust the time.
Melody:
Beep:
The default setting at the time of
Choose this setting to
shipment from the factory.
change from a Melody.
a beep
"Twinkle, Twinkle, Little Star"
"Twinkle, Twinkle, Little Star"
a beep
"Amaryllis"
beeps 5 times
You cannot change the Melody Signal of
the initiation of Reheating.
You cannot change the Sound Signal
during Cooking, Keep Warm or
Timer Cooking.
If you find it difficult to change/select the
Sound Signal, please start over from Step .
Beep:
It will beep 3 times when
the sound setting is
completed.
Adjusting time
Silent:
Choose this setting to
disable the Sound Signal.
no sound
1
Silent:
It will beep 1 time when
the sound setting is
completed.
Hide quick links:
Advertisement
Table of Contents
