Dazzle DCS 200 User Manual page 31

4. Click Yes (or OK) in the dialog box to begin formatting your media card.
The formatting process begins and a format status screen appears until the formatting
is complete.
When the formatting is complete, the Format Results dialog box appears, which
displays the formatting results.
5. Click OK in the dialog box to exit the formatting utility.
After formatting your digital media card, a dialog box (similar to the one shown below)
may appear recommending that you run the ScanDisk or CheckDisk utility. If you are
experiencing problems with your card, click Yes to verify that data can be stored
reliably on all areas of your card. However, in day-to-day use you should not have to run
the utility and you can click No.
After running ScanDisk or CheckDisk, or selecting No in the dialog box, the first
formatting utility dialog box reappears.
6. Click Close in the formatting utility dialog box to exit the utility.
Dazzle DVD Creation Station 200 User's Guide • Using the Digital Media Card Reader • Page 31