Inserting A Memory Stick Card - Dazzle DCS 200 User Manual

Inserting a Memory Stick Card

Before you insert a Memory Stick Card, be sure to place the DCS 200 in it's stand with the
Dazzle logo on the right-hand side. If you plan on writing to or deleting from your Memory
Stick card, make sure the card is not locked. The lock tab is located on the bottom of the
card. To insert a Memory Stick Card, follow these steps:
1. Position the Memory Stick in the direction shown in the illustration below.
A portion of the lower media slot is designed for inserting Memory Stick media cards.
This portion utilizes the center of the media slot for Memory Stick insertion.
2. Insert the Memory Stick into the slot with the gold contacts on the left-hand side.
Important: Notice the rounded corner of the Memory Stick card and be careful not to
insert the card in the wrong direction. To insert properly, be sure the card is positioned
with the rounded corner on top. You should see the gold contacts on the left when
inserting the media into the slot.
3. Gently push the Memory Stick in all the way until the card locks in place.
Caution: Insert the Memory Stick gently. If it is forced in, the card reader or the
Memory Stick may be damaged, or data on the card may be lost or corrupted. If
excessive force is required, or the card just doesn't seem to fit, do not force the card
in the reader. Contact Dazzle Technical Support for assistance.
Note: Do not insert a Memory Stick card in the DCS 200 card reader while
capturing video.
Note: The secure mode of Sony MagicGate is not supported.
Note: The card's
rounded corner must
be located at the top
when inserting.
Dazzle DVD Creation Station 200 User's Guide • Using the Digital Media Card Reader • Page 27
Memory Stick
portion of media slot