Roland MV-8000 Workshop Manual page 15

Saving Your Patch
1. Press INSTRUMENTS and make sure the patch's part is
selected.
2. Click Library and select the project library location where
you'd like to save your patch. You can put it anywhere
you want. If you're saving a new patch, pick an Init Patch
location. If you've added your samples to an existing
patch, select that patch's location to update it with the
new version.
3. Press Write Here, and then Yes to finish the operation.
When you're done working on the MV-8000, shut it down properly by
pressing SHUTDOWN, and be sure to save your project. If you don't, all your
work will be lost when your turn off the MV-8000.
The End
We hope you've found this workshop helpful. Keep an eye
out for other MV-8000 Workshop booklets, all available for
downloading at www.RolandUS.com.
For the latest MV-8000 updates and support tools, visit the Roland U.S.
Web site at www.RolandUS.com. If you need personal assistance, call our
amazing Product Support team at 323-890-3745.