1. Manuals
  2. Brands
  3. Bostitch Manuals
  4. Nail Gun
  5. CRN38K
  6. Operation and maintenance manual

Bostitch CRN38K Operation And Maintenance Manual

Cordless roofing nailer
Hide thumbs
Table of Contents

Advertisement

Quick Links

CORDLESS ROOFING NAILER
CLAVADORA DE TECHOS A PILAS
CLOUEUSE DE TOIT SANS FIL
OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN Y MANTENIMIENTO
MANUEL DE FONCTIONNEMENT ET D'ENTRETIEN
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL
TO UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS.
KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU
HAVE ANY QUESTIONS, CONTACT YOUR STANLEY-BOSTITCH REPRESENTATIVE
OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN
ESTUDIAR ESTE MANUAL CON EL FIN DE COMPRENDER Y SEGUIR LAS ADVER-
TENCIAS DE SEGURIDAD Y LAS INSTRUCCIONES. MANTENGA ESTAS INSTRUC-
CIONES CON LA HERRAMIENTA PARA REFERENCIA FUTURA. SI USTED TIENE
ALGUNA PREGUNTA, PÓNGASE EN CONTACTO CON SU REPRESENTANTE O DIS-
TRIBUIDOR DE STANLEY-BOSTITCH.
AVANT D'UTILISER CET OUTIL, TOUS LES UTILISATEURS DEVRAIENT ÉTUDIER CE
MANUEL POUR COMPRENDRE ET SUIVRE LES INSTRUCTIONS ET LES AVER-
TISSEMENTS DE SÉCURITÉ. GARDEZ CES INSTRUCTIONS AVEC L'OUTIL POUR
VOUS Y RÉFÉRER À L'AVENIR. POUR TOUTE QUESTION, PRENEZ CONTACT AVEC
VOTRE REPRÉSENTANT OU DISTRIBUTEUR STANLEY-BOSTITCH.
110504 REVB 12/00
CRN38K
Stanley Fastening Systems

Advertisement

Table of Contents
loading

Related Manuals for Bostitch CRN38K

Summary of Contents for Bostitch CRN38K

  • Page 1 BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, CONTACT YOUR STANLEY-BOSTITCH REPRESENTATIVE OR DISTRIBUTOR. ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN ESTUDIAR ESTE MANUAL CON EL FIN DE COMPRENDER Y SEGUIR LAS ADVER- TENCIAS DE SEGURIDAD Y LAS INSTRUCCIONES.

  • Page 2: Table Of Contents

    Stanley-Bostitch nails, staples and accessories. LIMITED WARRANTY Stanley-Bostitch, Inc., warrants to the original retail purchaser that this product is free from defects in material and workmanship, and agrees to repair or replace, at Stanley-Bostitch's option, any defective product within 1 year from the date of purchase. This warranty is not transferable.

  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS EYE PROTECTION which conforms to ANSI specifications and provides protection against flying particles both from the FRONT and SIDE should ALWAYS be worn by the operator and others in the work area when loading, operating or servicing this tool. Eye protection is required to guard against flying fasteners and debris, which could cause severe eye injury.

  • Page 4: Loading The Tool

    • Do not operate the Charger if it has received a sharp blow, been dropped or otherwise been damaged in any way. Do not disassemble the charger; refer to the Bostitch Service Center or a qualified service technician for service or repair. Incorrect re-assembly may result in a risk of electric shock or fire.

  • Page 5: Tool Operation

    BATTERY PACK OPERATION CHARGING THE BATTERY PACK • IMPORTANT – Charge the battery packs before using for the first time since they are shipped in a par- tially charged condition. Two or three additional charges will be required before the battery packs are fully conditioned and operating at full capacity.

  • Page 6: Tool Operation Check

    • For best operation hold the tool as you would a screwdriver or drill dri- ver as shown. • It is not necessary to push the tool hard, simply follow the nail down. NOTE: Head damage and incomplete drives will result if the tool is pushed hard.
  • Page 7 OBSERVE THE FOLLOWING FOR SAFE OPERATION • Use the STANLEY-BOSTITCH cordless tool only for the purpose for which it was designed. • Never use this tool in a manner that could cause a fastener to be directed toward the user or others in the work area.

  • Page 8: Trouble Shooting

    TROUBLE SHOOTING PROBLEM CAUSE CORRECTION CHARGER No lights turn on Not plugged in properly ....Plug in the charger Battery is not fully inserted into charger ..Make sure battery is pushed all the way into charger Charger has failed .

  • Page 9: Cleaning Instructions

    Coat each o-ring with “O”-LUBE before assembling. Lubricating the o-rings is recommended on a yearly basis for a normally used tool. Heavy usage may warrant more frequent greasing intervals. See your authorized Bostitch dealer or service center for o-ring service information.

  • Page 10: Accessories

    ACCESSORIES AVAILABLE 110679 O-ring lube 1lb. can 851325 Locktite® 271 packet BP20419 High energy 20.4V nickle cadmium battery pack BC20419 1 hour fast charger www.stanleyworks.com -10-...

Table of Contents