Control Elements - Behringer Ultra-Di Di100 User Manual

4
ULTRA-DI DI100 User Manual
Subsequently, the product must be returned Products which do not meet the terms of this limited
[ 2 ] [ 9 ]
in its original shipping carton, together with the
warranty will be repaired exclusively at the buyer' s expense.
return authorization number to the address indicated
BEHRINGER or its authorized service center will inform the
by BEHRINGER.
buyer of any such circumstance. If the buyer fails to submit
a written repair order within 6 weeks after notifi cation,
Shipments without freight prepaid will not
[ 3 ]
BEHRINGER will return the unit C.O.D. with a separate
be accepted.
invoice for freight and packing. Such costs will also be
§ 4 Warranty Exclusions
invoiced separately when the buyer has sent in a written
repair order.
This limited warranty does not cover consumable
[ 1 ]
parts including, but not limited to, fuses and batteries. Authorized BEHRINGER dealers do not sell new
[ 1 0]
Where applicable, BEHRINGER warrants the valves or meters products directly in online auctions. Purchases made
contained in the product to be free from defects in material through an online auction are on a "buyer beware" basis.
and workmanship for a period of ninety (90) days from date Online auction confi rmations or sales receipts are not
of purchase. accepted for warranty verifi cation and BEHRINGER will
not repair or replace any product purchased through an
This limited warranty does not cover the product if
[ 2 ]
online auction.
it has been electronically or mechanically modifi ed in any
way. If the product needs to be modifi ed or adapted in order
§ 5 Warranty transferability
to comply with applicable technical or safety standards
This limited warranty is extended exclusively to
on a national or local level, in any country which is not the
the original buyer (customer of authorized retail
country for which the product was originally developed
dealer) and is not transferable to anyone who may
and manufactured, this modifi cation/adaptation shall
subsequently purchase this product. No other person
not be considered a defect in materials or workmanship.
(retail dealer, etc.) shall be entitled to give any warranty
This limited warranty does not cover any such modifi cation/
promise on behalf of BEHRINGER.
adaptation, regardless of whether it was carried out
properly or not. Under the terms of this limited warranty,
§ 6 Claim for damage
BEHRINGER shall not be held responsible for any cost
Subject only to the operation of mandatory applicable
resulting from such a modifi cation/adaptation.
local laws, BEHRINGER shall have no liability to the
This limited warranty covers only the product
[ 3 ]
buyer under this warranty for any consequential or
hardware. It does not cover technical assistance for
indirect loss or damage of any kind. In no event shall
hardware or software usage and it does not cover any
the liability of BEHRINGER under this limited warranty
software products whether or not contained in the product.
exceed the invoiced value of the product.
Any such software is provided "AS IS" unless expressly
provided for in any enclosed software limited warranty.
§ 7 Limitation of liability
This limited warranty is invalid if the factory-
[ 4 ]
This limited warranty is the complete and exclusive
applied serial number has been altered or removed from
warranty between you and BEHRINGER. It supersedes
the product.
all other written or oral communications related to this
Free inspections and maintenance/repair work are product. BEHRINGER provides no other warranties for
[ 5 ]
expressly excluded from this limited warranty, in particular, this product.
if caused by improper handling of the product by the user.
§ 8 Other warranty rights and
This also applies to defects caused by normal wear and tear,
national law
in particular, of faders, crossfaders, potentiometers, keys/
buttons, guitar strings, illuminants and similar parts. This limited warranty does not exclude or limit the
[ 1 ]
buyer' s statutory rights as a consumer in any way.
Damage/defects caused by the following conditions
[ 6 ]
are not covered by this limited warranty: The limited warranty regulations mentioned herein
[ 2 ]
are applicable unless they constitute an infringement of
• improper handling, neglect or failure to operate the
applicable mandatory local laws.
unit in compliance with the instructions given in
BEHRINGER user or service manuals; This warranty does not detract from the seller' s
[ 3 ]
obligations in regard to any lack of conformity of the
•
connection or operation of the unit in any way
product and any hidden defect.
that does not comply with the technical or safety
regulations applicable in the country where the
§ 9 Amendment
product is used;
Warranty service conditions are subject to change
• damage/defects caused by acts of God/Nature
without notice. For the latest warranty terms and
(accident, fi re, fl ood, etc) or any other condition that is
conditions and additional information regarding
beyond the control of BEHRINGER.
BEHRINGER's limited warranty, please see complete
Any repair or opening of the unit carried out by
[ 7 ]
details online at behringer.com.
unauthorized personnel (user included) will void the
limited warranty. * BEHRINGER Macao Commercial Off shore Limited of Rue de Pequim
No. 202-A, Macau Finance Centre 9/J, Macau, including all
If an inspection of the product by BEHRINGER shows
[ 8 ]
BEHRINGER group companies
that the defect in question is not covered by the limited
warranty, the inspection costs are payable by the customer.
behringer.com
5
ULTRA-DI DI100 User Manual
Welcome to BEHRINGER!
DI stands for Direct Injection. On stage or in the studio there are sources you
want to connect to your mixer that are not equipped with a suitable connection.
Keyboards seldom have properly balanced outputs. Guitars cannot be directly
plugged into a mixer and placing a microphone in front of a backline is not
always ideal. A microphone picks up ambient noise such as other instruments.
Low frequencies (such as from a bass guitar) are especially difficult for a
microphone to handle.
A DI-box makes it possible to tap a signal from a high impedance unbalanced
line, for instance the signal from a guitar to a guitar amplifier, and inject it
directly into the mixer's input without having to use a microphone. But that's
not all, there are lots of situations where you want to inject the signal coming
from an unbalanced source directly into your mixer and preferably balanced, too.
That is the application of a Direct Injection box.
Impedance is the electrical frequency dependent resistance of a device combined
with its phase response. It is a literally complex matter. That is why a good DI-box
is distinguishable from a bad one. As with a power amplifier and speakers the
impedance to a device determines the performance. With a good power amplifier
the load impedance only affects the maximum power output. Whereas on
some other devices the impedance governs other properties as well. With a
transformer as used in a DI-box, the connected impedances (in and out) influence
the bandwidth, frequency response, distortion, etc.
There are two basic types of DI-boxes, passive and active. Both active and
passive DI boxes are designed to be connected to the console's microphone
input. A passive DI box has the advantage of being slightly lower in cost
(less electronics, no battery facility) but their performance is highly dependent
on the connected impedances. When the impedance on the mixer side of a
passive DI-box changes, the impedance on the input changes also. Not only
that, the frequency response changes, too. A passive DI-box only works well at
specified connected impedances, high in and low out, which means that they
only work in a standard application.
Active DI-boxes don't have such restrictions. The signal coming from the input
is buffered with an amplifier. The input impedance of the ULTRA-DI is ultra-high
so it doesn't affect the signal throughput at all. The output impedance of the
ULTRA-DI is balanced and very low so that it is much less susceptible to picking
up hum and noise. This way, the impedance for the signal source is independent
from the impedance of the used mixer and vice versa. There is no sound
alteration. The transformer used is BEHRINGER´s renowned OT-1 witch guarantees
distortion free, clean sound and a flat frequency response. Furthermore the
BEHRINGER ULTRA-DI can be powered by your console's phantom power or by
battery and switches automatically between these two.
◊
To avoid switching noise, you should mute the desk channel before
activating the DI100. Same applies when switching between battery
and phantom power and vice versa.
The design of the DI100 includes four sturdy rubber feet which protect the
unit (even during a unplanned drop) and allow cables to run underneath.
It also provides literally a "ground lift" so that the unit can be stacked on top
of another unit and other equipment without creating ground loops.
behringer.com
1.

Control Elements

Fig 1.1: Front & Rear DI100
With the ON/OFF switch you can switch the battery power on and off to
[ 1 ]
preserve battery life. Switched off the ultra-di will still work on phantom
power. Switched on, the ULTRA-DI will automatically switch between
battery and phantom power. When the DI100 is operating on battery
power the on/oFf LED will flash once every few seconds, when operating on
phantom power the LED will light up continuously.
INPUT
. Connect the source to this 1/4" jack to receive the signal.
[ 2 ]
To provide maximum flexibility the ULTRA-DI is also fitted with an
[ 3 ]
unbalanced XLR input to connect the source.
LINK OUT . This is the unbalanced parallel output of the ULTRA-DI.
[ 4 ]
Connect this to the input of the backline or monitor amplifier.
◊
The 1/4" jacks (input and link out) and the Input XLR are wired parallel,
so any connection as input will give the same performance.
The -20 dB attenuation switches greatly increase the operating range of the
[ 5 ]
ULTRA-DI. From the low-level signals of a high impedance microphone or
guitar to the hot speaker terminals of a P. A. amplifier. Depressing both will
give 40 dB attenuation.
◊ O nly use the -20 dB switches if you are sure the ULTRa-DI is clipping
(overloading) and not your mic pre-amp. always use as little
attenuation as possible to get the best possible signal-to-noise ratio.
OUTPUT . This is the balanced microphone level output of the ULTRA-DI.
[ 6 ]
Connection to the microphone input should be made with a standard high
quality balanced cable.
◊ Never connect pin 2 or 3 to pin 1 and never disconnect the shield from
pin 1, or the unit will not work on phantom power.
grOUNd LIFT switch to either connect the ground of input and
Use the
[ 7 ]
output or keep them completely separate. Depending on the grounding of
the connected devices linking or disconnecting will reduce hum or prevent
ground loops. grOUNd LIFT ON means no interconnection.
Battery compartment. Loosen the screw to open the compartment and to
[ 8 ]
replace the 9 V battery. When the ULTRA-DI is switched on battery power the
LED blinks, when it stops blinking it is time to change the battery.