Table of Contents
Advertisement
Quick Links
ONE YEAR LIMITED WARRANTY
The original registered owner of this
should contact SKYFOOD EQUIPMENT LLC at 305-868-1603 for any
warranty problems or service. SKYFOOD EQUIPMENT LLC will repair
or replace parts at our option for period of one year if unit fails to perform due
to defects in material or workmanship. Freight if required is at owner's
expense. Warranty does not include misuse or damage due to abuse as
determined by SKYFOOD EQUIPMENT LLC inspection. Units that are
70 lbs., or less are considered carry in and should be taken to an authorized
service facility.
Please read all safety instructions.
SERIAL #______________MODEL_______________
DETACH AND KEEP TOP PORTION
-------------------------------------------------------------------------------------
LIMITED WARRANTY REGISTRATION
OWNERS NAME
BUSINESS
ADDRESS
MODEL #
PURCHASED FROM
FILL OUT ABOVE INFORMATION AND MAIL OR FAX TO
SKYFOOD EQUIPMENT LLC:
Office: PO BOX 416702, Miami Beach, FL 33141-3230 –
Phone: 305 868 1603– Fax: 305 866 2704
Sales & Warehouse: 71 Bloomfield Ave, Newark, NJ 07104 –
Phone: 973 482 5070 – Fax: 973 482 0725
commercial@skyfood.us www.skyfood.us
TOLL FREE 800 445 6601
product
SERIAL #
–
Model
LI-Cocktail
LI-Cocktail
PROFESSIONAL BLENDER
UG0002- JUL./2009
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fleetwood LI-Cocktail
Summary of Contents for Fleetwood LI-Cocktail
-
Page 1: Professional Blender
PURCHASED FROM FILL OUT ABOVE INFORMATION AND MAIL OR FAX TO SKYFOOD EQUIPMENT LLC: Model LI-Cocktail LI-Cocktail Office: PO BOX 416702, Miami Beach, FL 33141-3230 – Phone: 305 868 1603– Fax: 305 866 2704 Sales & Warehouse: 71 Bloomfield Ave, Newark, NJ 07104 –... -
Page 2: Table Of Contents
SUMMARY 1. Introduction 1.1 Safety 1.2 Main Components 1.3 Technical Characteristics 2. Installation and Pre-Operation 2.1 Installation What to do and what not to do with your Professional Blender 3. Operation 3.1 Starting 3.2 Feeding Procedures 3.3 Cleaning 4. General Safety Rules 4.1 Basic Operation Practices 4.2 Cautions to Observe before turning the machine on 4.3 Routine Inspection... -
Page 3: Introduction
1. INTRODUCTION Tabela-02 1.1 Safety When using this equipment, keep in mind some basic safety PROBLEMS CAUSES SOLUTIONS precautions: Machine does not turn Electricity shortage or Check if plug is connect machine is unplugged to power source 1.1.1 Read all the instructions. Call Technical 1.1.2... -
Page 4: Main Components
4.6.1 Danger Any maintenance with the machine in working situation is dangerous. 1.3 Technical Characteristics TURN IT OFF BY PULLING THE PLUG OFF THE SOCKET DURING MAINTENANCE. DATE LI-Cocktail U.M. Voltage 110 ou 220 * Frequency [Hz] 50 ou 60 *... -
Page 5: Operation 03
2.2 What to do and what not to do with your Professional Blender 4.2.1 Danger An electric cable or electric wire with damaged jacket or bad insulation You have to: could cause electrical shocks as well as electrical leak. Before use, check conditions of all wires and cables. -
Page 6: Warnings
4.1 Basic Operation Practices IMPORTANT 4.1.1 Dangerous parts This equipment is not recommended to process hard mixtures. Some parts of the electric devices are connected to high voltage points. These parts when touched may cause severe electrical shocks or even be Never turn the machine on if it is empty as irreparable damages may occur.
Need help?
Do you have a question about the LI-Cocktail and is the answer not in the manual?
Questions and answers