Table of Contents
Advertisement
Installing the VS-VML Card
The VS-VML card provides 4 voice mail/auto attendant ports. This card is installed in slot 6 of the
VS-MAIN motherboard. Follow the instructions below to install the VS-VML.
Step 1a: Installing the VS-VML Card in an existing system
Step 1a is only required if the VS-VML card is being installed in an existing ADIX-VS system.
Note: DO NOT INSTALL THE VS-VML CARD UNTIL STEP 9.
1. From an ADIX Attendant key telephone (SATT) or ADIX KT+DSS, enter ADIX
database programming mode.
2. Go to Class 01 Item 06 — "Number of System Station Ports" and increase the number
of system station ports by eight ports for each VS-VML card.
3. Exit ADIX database programming mode and wait until the memory LED on the CPU
stops flashing to indicate completion of the data write process (approximately 10
seconds depending on the size of your database).
4. Reset the ADIX by pressing the Reset button on the CPU card.
5. After the system reset is complete, enter ADIX database programming mode. Go to
Class 01 Item 03 — "Port Definition" and program all eight of the physical ports
corresponding to the card slot in which the IX-4VML will be installed as voice
mail/auto attendant ports (data = 0-4-1-logical port number).
Note: All eight ports must be programmed as voice mail ports for both IX-4VML (4
ports) and IX-4VML with IX-4EVML (8 ports) installations.
6. Go to Class 01 Item 04 — "Port Configuration" and program the physical ports
corresponding to the card slot in which the VS-VML is installed (defined as voice mail
ports in step 5) as 0 - Voice Mail Auto Attendant Port (default).
7. Exit ADIX database programming mode and wait 10 seconds.
8. Power down the ADIX
9. Insert the VS-VML card in the card slot.
Important: This card slot must correspond to the physical port numbers that were
programmed as voice mail ports in steps 5 and 6 above.
10. Go to Step 2 of the installation process.
Chapter 6 – Optional Feature Installation
87
Hide quick links:
Advertisement
Table of Contents
