Table of Contents
Advertisement
ADIX-VS Technical Manual
Installing the VS-4PSUB Card
The VS-4PSUB card provides four interface circuits for ADIX key telephones,Versa-Phones. See
Component Description for detailed information on the VS-4PSUB card.
CAUTION! Do not remove or insert a circuit card while the ADIX-VS is powered up. The ADIX-VS
does not support power-on maintenance.
To Station MDF
FIGURE37. STATION CARD INSTALLATION
Preparation
None.
Installation
1. Loosen the two screws on each side of the card stopper bracket and slide the card stopper bracket
down approximately ¼" in order to clear the circuit cards.
2. Plug the card into any station card slot. Make sure that the card is inserted deep enough for all
connector pins to make complete contact with those on the motherboard (VM-MAIN).
3. Secure the FG bracet on the FG plate with a screw.
4. Secure the card stopper bracket on the motherboard(VS-MAIN) with the four screws if no other
cards are to be installed.
SLT2
KT6
KT4
KT2
SLT1
KT5
KT3
KT1
80
Section 3 – ADIX-VS Installation
CN6
CN2
s1
DC
1 2 3
4
5
6
7
8
OUTPUT
AC
1
BAT1
BAT2
0
CN1
Hide quick links:
Advertisement
Table of Contents
