Embertec SmartSwitch PC-ET-01 Instruction Manual page 16

Problem
The Embertec SmartSwitch™
PC is not receiving power.
The Embertec SmartSwitch™
PC is not powering down
my peripheral appliances.
This may be caused by
older laptops where the
batteries are continuously
recharging.
The Embertec SmartSwitch™
PC has stopped working.
16
Troubleshooting Guide
To Check
• Ensure the mains power supply
• Ensure the equipment is plugged
• To maximise your energy saving,
• Unplug all the appliances connected
switch is turned on at the wall or
power board.
into the 'Power Saver' socket, not to
the 'Computer Only' socket.
please ensure your computer's
power management settings are
active so the computer enters
sleep, standby or hibernate modes.
normally this function is found in a
menu item called 'Power Options' .
into the Embertec SmartSwitch™
PC adaptor and then unplug the
adaptor from the wall socket. Then
reconnect everything again.