Care And Maintenance P15; Disposal/Recycling; Overload Protection - Embertec SmartSwitch PC-ET-01 Instruction Manual

NOTE: The Embertec
SmartSwitch™ PC will switch
off all peripherals when the
computer enters sleep, standby,
hibernate or off modes. If any
program is working or activity
is detected, all peripherals will
remain on (even when the
screen saver is already on).

Overload Protection

The Embertec SmartSwitch™
PC is fitted with a safety
device that switches off
the adaptor in the event
of overloading. Should the
adaptor stop working, turn
off and unplug all units, and
reset the safety protection
button on the adaptor before
attempting to restart the
adaptor. If the adaptor fails to
operate or the safety device
switches off again, contact
Embertec on 1300 0 EFFORT
1300 0 333 678.
Care and Maintenance
To clean the outside of the
Embertec SmartSwitch™ PC
adaptor, first switch off and
remove the adaptor from the
power point. Then wipe the
exterior with a soft, damp cloth.
never use an abrasive cleaner.
When not in use, store the
Embertec SmartSwitch™
PC (preferably in its original
box) in a cool, clean and dry
location.

Disposal/Recycling

To protect the environment,
the Embertec SmartSwitch™
PC should be recycled, or
disposed of safely at the end
of its life. Please return the
Embertec SmartSwitch™ PC
to a recycling centre for safe
recycling or disposal.
www.recyclingnearyou.com.au
15