Smartswitch™ Pc - Embertec SmartSwitch PC-ET-01 Instruction Manual

Using Your Embertec SmartSwitch™ PC
Before First Use
Remove any packaging and
promotional material from the
Embertec SmartSwitch™ PC
adaptor.
Setting Up the Embertec
SmartSwitch™ PC
To maximise your energy
saving, please ensure
your computer's power
management settings are
active so the computer enters
sleep, standby or hibernate
modes. normally this function
is found in a menu in a PC,
called 'Power Options'.
In a iMac, 'Energy Saver' is
used to tell the computer
when to go to sleep. Other
option to send your Mac to
sleep, close the lid on your
portable mac or press the
on/off button once on your
desktop mac.
Connect your computer power
plug into the socket marked
'Computer Only' .
NOTE: Only one computer
is to be connected to the
'Computer Only' socket.
Identify the equipment that is
used with the computer, such
as monitors, printers, speakers,
external hard drives and lamps,
and plug them into the socket
marked 'Power Saver' .
NOTE: Where there is more
than one device that needs
to be connected, any power
board or surge board may
be connected to the 'Power
Saver' socket.
NOTE: Devices that are
connected to the 'Power
Saver' socket will be
automatically switched off
during a power saving cycle.
Connect the equipment that
needs to remain turned on,
such as the internet modem /
router, fax machine, to another
free socket on the wall outlet.
Plug the Embertec SmartSwitch™
PC into a 230V or 240V power
point, and turn the power
point on at the wall.
NOTE: Only equipment
connected to the Embertec
SmartSwitch™ PC will be
protected against surge.
11