Table of Contents
Advertisement
Connecting with other devices
S Beam
Use this feature to send data, such as videos, images, and documents.
1
Activate the S Beam feature on the receiving device.
2
On the Apps screen, tap Settings → NFC, and then tap the NFC switch to activate it.
Alternatively, open the quick setting panel and tap NFC to activate it.
3
Tap S Beam and tap the S Beam switch to activate it.
4
Select a file and touch the other device's NFC antenna to your device's NFC antenna.
Select a file and touch the other device's NFC antenna to your device's NFC antenna.
Select a file and touch the other device's NFC antenna to your device's NFC antenna.
5
When Touch to beam appears on the screen, tap your device's screen to send the file.
• D o not send copyright-protected data via S Beam. Doing so may violate copyright
Do not send copyright-protected data via S Beam. Doing so may violate copyright
Do not send copyright-protected data via S Beam. Doing so may violate copyright
laws. Samsung is not responsible for any liabilities caused by the illegal use of
laws. Samsung is not responsible for any liabilities caused by the illegal use of
laws. Samsung is not responsible for any liabilities caused by the illegal use of
copyrighted data.
• I f both devices try to send data simultaneously, the file transfer may fail.
If both devices try to send data simultaneously, the file transfer may fail.
If both devices try to send data simultaneously, the file transfer may fail.
appears on the screen, tap your device's screen to send the file.
appears on the screen, tap your device's screen to send the file.
158
Advertisement
Table of Contents
