User’s Manual GENERAL INTRODUCTION Thank you for purchasing this telephone. Please read the manual carefully for proper use. SAFETY INSTRUCTION When using your telephone, please follow these basic safety precautions to reduce the risk of fire, electric shock or injury to persons. 1.
Page 4
User’s Manual OPERATION 1) Preparation 1.1 Connect the line plugs into phone line jack and the other plug to connect to the wall jack. 1.2 Insert the handset coil cord into the phone jack at the bottom. 1.3 Set the dial mode according to local network, while T refers to Tone dialing and P refers to pulse dialing.
Page 5
User’s Manual insert it again in reverse. So the backer can hold and keep the handset not to drop down. 10) Ringing volume There are two levels for the ringing volume control: HI & LO for selection. If you don't want ringer to be loud during incoming calls, slide the RING switch which is located at the bottom of the unit to LO position.
Page 6
Note: Due to continuous product development all features and specifications are subject to change without prior notice For more Information on Warranty and Product Support in Singapore please call (65) 68412668 or Fax to (65) 68412628. Email: support@alcom.com.sg Website: www.alcomonline.com Please register your warranty online at http://www.alcomonline.com/warranty.html...
Need help?
Do you have a question about the AT2322 and is the answer not in the manual?
Questions and answers