Viewing And Changing Temperature - Slant/Fin LX-90 Installation And Operating Instructions Manual

32
Press "SELECT" button for viewing different modes on "MODE DISPLAY"
MODE
DISPLAY
blinking
blinking
blinking
NOTE:
1- For space heating mode "0" (boilers not utilizing outdoor sensor))
2- For DHW mode "2" (storage tank with Aquastat)
3- For DHW mode "1" (storage tank with sensor)
VIEWING AND CHANGING TEMPERATURES
Space heating supply water temperature could be changed by
pressing "Up/Down" button. Settable from 90˚F to 185˚F
Domestic hot water supply temperature could be changed by
pressing"Up/Down" button. Settable from 104˚F to 185˚F
Domestic hot water tank temperature could be changed by
pressing "Up/Down" button. Settable from 104˚F to 160˚F
Temperature display shows actual supply water temperature.
Temperature display shows actual return water temperature.
Temperature display shows actual DHW tank temperature.
Temperature display shows actual flue gas temperature.
Temperature display shows actual outside temperature.
Table 4
DESCRIPTION & TEMPERATURE DISPLAY
(steps of 1 F). The default value is 176˚F.
Press "Enter" button to store.
(see note 1)
(steps of 1 F). The default value is 176˚F.
Press "Enter" button to store.
(see note 2)
(steps of 1 F). The default value is 140˚F.
Press "Enter" button to store.
(see note 3)
(if the water tank is equipped with sensor).
(if outdoor sensor is used)
Lynx