Error Messages - Samsung WB35F User Manual

Error messages

When the following error messages appear, try these remedies.
Error message Suggested remedies
Cannot read file
Delete the damaged file or contact a service center.
content
• Turn off your camera, and then turn it on again.
• Remove your memory card, and then insert it again.
Card Error
• Format your memory card.
The inserted memory card is not supported by your
Card not supported. camera. Insert a microSD, microSDHC, or microSDXC
memory card.
• The camera cannot connect to the network using the
selected access point. Select another AP and try again.
Connection failed.
• The camera has failed to connect to the other devices.
Try connecting again.
File names do not match the DCF standard. Transfer
the files from the memory card to your computer and
DCF Full Error
format the card. Then, open the Settings menu and
select File No. → Reset. (p. 109)
Network connection disconnected while photos are
Device disconnected. being transferred to supported devices. Re-select a
supported device.
Error message
File system not
supported.
Initialization failed.
Low Battery
Memory Full
No Image File
Password Incorrect
Transfer failed.
112
Appendixes
Suggested remedies
Your camera does not support the FAT file structure of
the inserted memory card. Format the memory card on
the camera.
The camera has failed to locate a device that supports
Samsung Link. Turn on devices on the network that
support Samsung Link.
Insert a charged battery or recharge the battery.
Delete unnecessary files or insert a new memory card.
Capture photos or insert a memory card that contains
some photos.
The password for transferring files to another camera is
wrong. Enter the correct password.
• The camera has failed to send e-mails or files to other
devices.Try sending again.
• Check the network connection and try again.