Camera maintenance
•
If you reconnect the power cable when the battery is fully charged, the status
lamp turns on for approximately 30 minutes.
•
Using the flash or recording videos depletes the battery quickly. Charge the
battery until the red status lamp turns off.
•
If the indicator light does not illuminate, reconnect the cable, or remove the
battery and insert it again.
•
Overcharging batteries may shorten battery life. After charging is finished,
disconnect the cable from your camera.
•
Do not bend or place heavy objects on the AC cable. Doing so may damage the
cable.
Notes about charging with a computer connected
•
Use only the provided USB cable.
•
The battery may not charge when:
-
you use a USB hub
-
other USB devices are connected to your computer
-
you connect the cable to the port on the front side of your computer
-
the USB port of your computer does not support the power output standard
(5 V, 500 mA)
Handle and dispose of batteries and chargers with care
•
Never dispose of batteries in a fire. Follow all local regulations when you dispose
of used batteries.
•
Never place batteries or cameras on or in heating devices, such as microwave
ovens, stoves, or radiators. Batteries may explode when they are overheated.
120
Appendixes
Need help?
Do you have a question about the WB35F and is the answer not in the manual?