JVC AV-21BD5EKI Service Manual page 10

AV-21BD5EKI AV-21BD5EP AV-21BD5EE
AV-21BD5EKIS AV-21BD5EPS AV-21BD5EES
BASIC OPERATION OF SERVICE MENU
REMOTE CONTROLLER (RM-C71, RM-C72)
How to ENTER and EXIT from service mode
1. Select the CH-91.
2. Press the MENU KEY of the remote control unit and select
PICTURE from the MENU with the P.( ▲ )/ P.( ▼ ) key of the
remote control unit .
3. While pressing the P. MODE/OK KEY of the remote control unit,
select "sharpness" from the MENU with the P.( ▲ )/ P.( ▼ ) /
-/ + key. Then, set the set value of "sharpness" to "0" with
the -/ +KEY.
4. Press the MENU KEY of the remote control unit twice and return
to the normal screen. To enter the SERVICE MODE, change the
indication of RED, GREEN and MENU, in turn, with the key of
the remote control unit.
5. When exiting from the SERVICE MODE, turn the power switch
off.
How to set SERVICE MODE
1. Select the setting item you want to change with the P.( ▲ )/ P.( ▼ )
key on the remote control unit. (The item you selected will be
indicated by YELLOW on the display.)
2. When changing the set values, use the
remote control unit.
3. When the setting has been completed, turn the power switch off.
(The changed set values are stored in memory.)
SERVICE MENU screen selection
Press the P.( ▲ )/ P.( ▼ ) key ･･････････ select menu item.
(The letters of the selected items are displayed in yellow)
+KEY ･･･････････ setting the value item.
Press the -/
･ AGC ･ VS Cor
･ Black R ･ V Shift
･ Black G ･ H Width
･ WP Red ･ EW Parabo
･ WP Green ･ Up Corner
･ WP Blue ･ Dw Corner
･ H Parall ･ EW Trapez
･ H Bow ･ Option
･ H Shift
･ V Slope
･ V Amp
1-10
-/ +KEY on the
Setting value Setting value Setting value Setting value
No.51742
SERVICE SERVICE SERVICE SERVICE
** Black R ** Black R
** Black R ** Black R
screen screen screen screen
SERVICE SERVICE menu item menu item menu item menu item
SERVICE SERVICE
** Black R ** Black R
** Black R ** Black R