Flymo GardenVac Plus Original Instructions Manual
Hide thumbs
Also See for GardenVac Plus:
- Operator's manual (17 pages) ,
- Important information manual (13 pages) ,
- User manual (13 pages)
Related Manuals for Flymo GardenVac Plus
Summary of Contents for Flymo GardenVac Plus
- Page 1 Original Instructions For all customer enquiries or for replacement parts, contact:- ¤ 01325 300303 www.flymo.com customer.services@husqvarna.co.uk...
-
Page 2: Carton Contents
IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd. Customer Service Department direct Telephone : 01325 300303 Fax : 01325 302530 Safety If not used properly this Gardenvac can be dangerous. - Page 3 3-pin plug. 5. If in doubt consult your local Service Repairer or • Flymo connectors are suitable for use with 2 core cable only. Under no circumstances should these con- qualified electrician before the machine is used.
-
Page 4: Assembly Instructions
Assembly Instructions To Attach Debris Bag to Bag Frame To Fit the Cutting Line to the Cutting Head (D) With bag frame on the ground:- • Switch off and disconnect from the mains 1. Fit first two holes on the plastic trim of the debris electricity supply BEFORE removing or fitting the cutting line. -
Page 5: How To Use
Assembly instructions Fitting the Handle Bolt (G) 1. Place handle bolt into the location slot on the product and slide into place.(G). 2. Repeat on the other side. Buckle Fitting the Handle (H) 1. Locate handle onto handle bolts on each side of the product. - Page 6 How to Use Con’t JET VACUUM Position 3 - Jet Vacuum Mode This position is intended to be used to collect debris which is damp or stubborn. It directs a small jet of air towards the ground which will loosen stubborn material. Using As A Jet Vacuum 1.
-
Page 7: Service Recommendations
A network of specialist dealers can be found in your varna UK Ltd. stockists. local Yellow Pages. To obtain service on your Flymo 4. Your product is uniquely identified by a silver and product simply telephone or visit your local Service black product rating label Centre. -
Page 8: Ec Declaration Of Conformity
Guarantee & Guarantee Policy If any part is found to be defective due to faulty manufacture Failures not covered by guarantee within the guarantee period, Husqvarna UK Ltd., through its Replacing Cutting Line. Authorised Service Repairers will effect the repair or replace- Failures as a result of not reporting an initial fault.