1. Manuals
  2. Brands
  3. ALLIANCE Manuals
  4. Washer/Dryer
  5. Metered
  6. Installation & operation manual

ALLIANCE Metered Installation & Operation Manual

Stacked washer and dryer
Hide thumbs Also See for Metered:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operation & Installation Manual
Washer and Dryer
Para bajar una copia de estas instrucciones
en español, visite www.comlaundry.com.
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Stacked
Metered
Electric and Gas Models
www.comlaundry.com
SWD447C
Part No. 802702R3
July 2008

Advertisement

Table of Contents
loading

Related Manuals for ALLIANCE Metered

Summary of Contents for ALLIANCE Metered

  • Page 1 Stacked Washer and Dryer Metered Electric and Gas Models Para bajar una copia de estas instrucciones en español, visite www.comlaundry.com. SWD447C Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) Part No. 802702R3 www.comlaundry.com...
  • Page 3 A “T-Handle” type gas shut-off valve must be installed in the gas supply line to this appliance. ● This appliance must not be installed in a bedroom or bathroom. ● 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 4: Table Of Contents

    All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 5 Care of Your Dryer ................45 Reinstallation of Shipping Materials ..........46 Motor Overload Protector..............46 For Energy Conservation..............46 Troubleshooting .................. 47 Contact Information................49 Installer Checklist..............Back Cover 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 6: Safety Information

    6. Before the unit is removed from service or information that is important but not hazard discarded, remove the doors to the washing and related. drying compartments. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802702...
  • Page 7 State of California to cause cancer, birth defects or other reproductive harm. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 8 Always contact your dealer, distributor, service agent parts. or the manufacturer about any problems or conditions 35. DO NOT bypass any safety devices. you do not understand. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 9: Installation

    (71.1 cm) (68.3 cm) (5.1 cm) (3.81 cm) SWD908N GAS DRYERS MODELS EQUIPPED WITH DRAIN HOSE SWD908N *With leveling legs turned into base. 3/8 in. NPT Gas Connection 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 10 For maximum drying performance, we recommend that more clearance be allowed around the dryer than the clearances that are listed throughout this manual. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 11: Before You Start

    Water is used during testing at the manufacturer. SWD692N Safety Glasses Wood Block Power Cord (Electric Models) Wrench Screwdriver Level 5/16 Inch Socket Wrench Duct Tape Teflon Tape (Gas Models) Figure 1 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 12: Installing The Unit

    Turn water on and check for leaks. If leaks are found, retighten the hose couplings. Continue tightening and rechecking until no leaks are found. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 13 All hoses should be replaced every five years. Figure 4 WATER MIXING VALVE SWD631N SWD631N Water Faucets Cold Water Connection Hot Water Connection Water Fill Hoses Figure 3 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 14: Step 3: (Non-Gravity Drain Models Only) Connect Drain Hose To Drain Receptacle

    SWD835N Drain Hose Beaded Tie-Down Strap Standpipe 2 in. (5.08 cm) or 1-1/2 in. (4 cm) Figure 5 SWD745N SWD745N Drain Trough Drain Outlet Hose Figure 6 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 15: Step 5: (Gas Dryer Only) Connect Gas Supply Pipe

    For proper operation at altitudes above 2000 feet (610 m) the natural gas valve spud orifice size must be reduced to ensure complete combustion. Refer to Table 1. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 16: Step 6: (Electric Dryer Only) Connect Electrical Plug

    Refer to Step 9 (Check Heat Source). L.P. (Liquefied Petroleum) Gas, 2500 Btu/ft (93.1 MJ/m ), service must be supplied at 10 ± 1.5 inch water column pressure. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 17 IS NOT connect dryer to 110, 115, or 120 Volt circuit. supplied with dryer. Type of power cord and gauge of wire must conform to local codes. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 18 Ground to Neutral Wire Neutral Terminal “L2” Terminal Center Wire (Neutral) Strain Relief (Not supplied with dryer) Ground Screw “L1” Terminal Black Wire White Wire (Neutral) Red Wire Figure 9 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 19 3. Use a strain relief and insert end of power cord through power supply hole. 2. Remove access cover from rear of dryer. D696I D695I Figure 12 Figure 11 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 20 8. Reinstall access cover and screw. D695I Figure 15 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 21 10. Reinstall access cover and screw. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 22: Step 7: Connect Dryer Exhaust System

    DO NOT install flexible duct in concealed ● which will decrease dryer efficiency and will void spaces, such as a wall or ceiling. machine warranty. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 23 40 in (260 cm bottom of the dryer’s front panel with laundry, rugs, etc. Blockage will decrease airflow through the dryer, thus reducing the efficiency of the dryer. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 24: Exhaust Direction

    NOTE: The maximum length of a 4 in. (10.2 cm) diameter flexible metal duct must not exceed 7.87 ft. (2.4 m), as required to meet UL2158, clause 7.3.2A. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 25 58786 Backdraft Damper Weather Hood or Sweep Elbow (Available through your local authorized parts (No cap or screen) source) Clean Out Cover (must be provided). Inspect monthly. Figure 20 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 26 VERTICAL duct system. This will prevent a backdraft when dryer is not in use, and will keep the exhaust air in balance within the central exhaust system. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 27: Step 8: Position And Level The Unit

    Place unit in position on a solid, sturdy and level floor. Installing the unit on any type of carpeting, soft tile, a platform or other weakly supported structures is not recommended. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 28 For easier access to leveling legs, prop up unit with a wooden block. Refer to Figure 25. Loosen the locknuts and adjust legs by screwing into or out of unit base. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 29: Step 9: (Washer Only) Remove The Shock Sleeves And Shipping Brace

    SWD797N Reinstall front access panel. SWD797N Figure 27 FLW2124N FLW2124N Shock Sleeves Motor Mount Hooked End of Shipping Brace Bolts and Lockwashers H315I Figure 26 Figure 28 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 30: Step 11: Plug In The Washer And Dryer

    Do not operate other appliances on the same circuit when this appliance is operating. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 31 W518 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 32: Step 12: Recheck Steps 1-11

    W216 Do not modify the plug provided with the washer – if it will not fit the outlet, have a proper outlet installed by a qualified electrician. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 33 MODELS STARTING SERIAL NO. 0804 D700I DRY2235N Closed Position 1/8 in. (3.1 mm) Pipe Plug Shut-Off Valve Handle (For checking manifold pressure) Air Shutter Lockscrew Open Position Air Shutter 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 34: Operation

    SWD801N NOTE: Small items, such as baby socks, may get Figure 33 caught around the door. Place these articles inside a mesh garment bag. SWD800N Figure 32 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802702...

  • Page 35: Step 3: Add Laundry Supplies

    NOTE: Changes can be made to Fabric Selector setting up until the first fill is complete. SWD802N Detergent Bleach FLW1920N Fabric Softener FLW1920N Figure 36 Figure 34 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 36: Step 6: Insert Coin(S) Or Card

    Figure 38 W092 Step 7: Start Washer After vend price has been satisfied, push the START keypad. Door must be closed to start washer. FLW1923N FLW1923N Figure 39 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 37: Operation Instructions For Netmaster Washers

    DELICATES cycle. The cycle includes agitation and final spin speeds that maintain the load’s balance and minimize wear to the articles. SWD804N Detergent Bleach Fabric Softener Figure 42 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 38: Step 4: Determine Proper Controls For Washer

    Insert coin(s) in coin slot. Check pricing as seen on digital display. PERM NORMAL DELICATES PRESS START WARM COLD H205I H205I Figure 44 W387I Figure 46 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 39: Step 8: Start Washer

    WARNING To reduce the risk of bodily injury, do not remove laundry from washer until all lights are out, and all moving parts have stopped. W092 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 40: Operation Instructions For Mdc Dryers

    Clean lint filter before each use. Figure 50 Step 3: Close Loading Door Close loading door. Dryer will not operate with the door open. SWD757N Figure 49 SWD759N SWD759N Figure 51 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 41: Step 4: Determine Proper Controls For Dryer

    Remove knits when slightly damp because overdrying may cause shrinkage. Do not tumble dry knit woolens. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 42: Step 7: Start Dryer

    COOL DOWN is lit whenever the COOL DOWN portion of a heated cycle is active. It is also lit when no heat is programmed for a cycle in operation. DRY1 DRY1928N Figure 56 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 43: Operation Instructions For Netmaster Dryers

    Figure 58 Step 3: Close Loading Door Close loading door. Dryer will not operate with the door open. SWD750N SWD761N Lint Filter SWD761N Figure 59 Figure 57 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 44: Step 4: Determine Proper Controls For Dryer

    Remove knits when slightly damp because overdrying may cause shrinkage. Do not tumble dry knit woolens. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 45: Step 7: Start Dryer

    It will also flash alternately with ADD TIME when a card is inserted while a cycle is running or when a card is left in the reader. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 46: Maintenance

    The outside perimeter of the door glass where the ● seal contacts the glass. The front surface of the door seal lip. ● © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802702...

  • Page 47: Care Of Your Dryer

    NOTE: The wiring diagram is located inside the control panel. WARNING Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. W049 SWD750N Lint Filter Figure 65 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 48: Reinstallation Of Shipping Materials

    Shock Sleeves Motor Mount Hooked End of Shipping Brace Bolts and Lockwashers Figure 66 Refer to Installation section, Step 9, for proper procedures whenever the washer is moved. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 49: Troubleshooting

    If using non-HE detergent, use only 1/2 of the detergent manufacturer’s recommended amount. • Laundry load may be overloaded. Make sure you are using proper load sizes. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 50 • Check room for odors before drying clothes. Any odor (fried foods, paint, varnish, Clothes Have Odor cleaners, burning wood, etc.) will transfer to clothing as the dryer draws air from the room. Ventilate room before drying clothes. 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 51: Contact Information

    The nameplate will be in the location shown in the illustration below. Please include a copy of your bill of sale and any service receipts you have. D063K Nameplate Figure 67 802702 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 54: Installer Checklist

    Installer Checklist Fast Track for Installing the Stacked Washer and Dryer (Refer to the manual for more detailed information) • Position Unit Near Area • Position and Level the of Installation. Unit. CHECK • Connect Fill Hoses. CHECK COLD SWD796N SWD796N Washer Only •...

This manual is also suitable for:

Metered gas series

Table of Contents