Programming The Solo 15 Universal Remote; Programming Your Remote To Control Your Source - Bose Solo 15 Owner's Manual

Programming the Solo 15 universal remote

You can program the universal remote to control your TV, DVD, Blu-ray Disc
cable/satellite box, game system or DVR.

Programming your remote to control your source

1. Power on your source.
2. Locate the code for your source's brand in the Universal Remote Device Codes
book (provided).
3. On the remote control, press and hold the appropriate source button until all six
source buttons glow, then release.
For example, to program your TV, press and hold
Only the appropriate source button glows.
4. On the number keypad, enter the code for your source's brand.
Note: If all six buttons blink three times, you entered an invalid code.
Repeat steps 3 and 4.
Press + on the volume button.
5.
6. Test the source for basic functions:
• TV: press the channel buttons. Press
Press and
• Cable/satellite box: press
Press and
• DVD or Blu-ray Disc
Press and
• Game system: press
7. If your source responds to basic functions, press
your settings.
If your TV does not power off
Use the remote control's code scanner to find the code for your source.
1. Press + on the volume button to try another code.
Note: If all six buttons blink three times, you have cycled through all codes for your
source.
2. Test the source for basic functions (see step 6 in "Program the remote to control
your source").
3. Repeat steps 1 and 2 until your source responds.
4. Press
Note: Your source may not be compatible with universal remote controls. Refer to
your source owner's guide for more information.
to navigate.
to navigate.
player: press
™
to navigate.
and
to save your settings.
. The settings menu appears.
. The programming guide appears.
. The settings menu appears.
to navigate through your menu.
Operation
player,
™
.
to save
English - 23