Cadillac 2013 ATS Owner's Manual page 55

not recalling for two seconds. Try
recalling the memory position again
by pressing the appropriate memory
button. If the memory position is still
not recalling, see your dealer for
service.
Storing RKE Memory Positions
Every time the ignition is placed in
OFF, the vehicle will automatically
store the driver seat and outside
mirror positions to the RKE
transmitter used to start the vehicle.
These positions are called RKE
Memory positions and may be
different than the previously
mentioned Button Memory positions
saved to the 1, 2, and
buttons.
Recalling RKE Memory Positions
(Auto Memory Recall)
The Auto (Automatic) Memory
Recall feature automatically recalls
the previously stored RKE Memory
positions for the current driver when
entering the vehicle.
Depending upon the Auto Memory
Recall feature enabled in the vehicle
personalisation menu, RKE Memory
positions are recalled in the
following ways:
To activate the recall when On -
Driver Door Open is selected in the
vehicle personalisation menu:
On vehicles with RKE, press
on the RKE transmitter and open
the door.
On vehicles with keyless access,
press the lock/unlock button on
the outside driver door handle
and open the driver door. The
RKE transmitter must be present
for the recall to activate.
If the driver door is already
open, press on the RKE
transmitter to activate the recall.
To activate the recall when On - At
Ignition On is selected in the vehicle
personalisation menu:
Place the ignition in ON/RUN/
START.
Seats and Restraints
See Vehicle Personalisation on
page 5 40.
To stop recall movement, press one
of the memory, power mirror,
or power seat controls. If On - At
Ignition On is selected in the vehicle
personalisation menu, placing the
ignition in OFF also stops the recall.
If something has blocked the driver
seat while recalling a memory
position, the recall may stop.
Remove the obstruction; then press
and hold the appropriate manual
control for the memory item that is
not recalling for two seconds. Try
recalling the memory position again
by opening the driver door and
pressing on the RKE transmitter.
If the memory position is still not
recalling, see your dealer for
service.
Easy Exit Recall
If programmed on in the vehicle
personalisation menu, the Easy Exit
feature automatically moves the
driver seat and outside mirrors to
3-7