Engine Coolant Temperature; Seat Belt Reminders - Cadillac 2013 ATS Owner's Manual

2013 ats
Hide thumbs Also See for 2013 ATS:
Table of Contents

Advertisement

Here are four things that some
owners ask about. None of these
show a problem with the fuel gauge:
At the service station, the fuel
pump shuts off before the gauge
reads full.
It takes a little more or less fuel
to fill up than the gauge
indicated. For example, the
gauge may have indicated the
tank was half full, but it actually
took a little more or less than
half the tank's capacity to fill
the tank.
The gauge moves a little while
turning a corner or speeding up.
The gauge takes a few seconds
to stabilise after the ignition is
turned on and goes back to
empty when the ignition is
turned off.
Engine Coolant
Temperature Gauge
This gauge measures the
temperature of the vehicle's engine.
While driving under normal
operating conditions, if the needle
moves into the shaded area, the
engine is too hot. Pull off the road,
stop the vehicle, and turn off the
engine as soon as possible.
Instruments and Controls

Seat Belt Reminders

Driver Safety Belt Reminder
Light
There is a driver safety belt
reminder light on the instrument
cluster.
When the vehicle is started, this
light flashes and a chime may come
on to remind the driver to fasten
their safety belt. Then the light stays
on solid until the belt is buckled.
This cycle may continue several
times if the driver remains or
becomes unbuckled while the
vehicle is moving.
If the driver safety belt is buckled,
neither the chime nor the light
comes on.
5-11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents