Edirol M-16DX Workshop Manual page 7

Power Cmp2
Power Cmp3 is for vocals, making them tighter and more up-front.
Parameter: This parameter
NS sets the threshold below which unwanted,
range: -90 to -440dB quieter sounds are cut in volume to
generate a cleaner signal.
TONE adjusts the level of the signal's mid-
range: 0-100 frequency content. A setting of 50 leaves
it in its original state.
TUBE sets the amount of vacuum tube-like
range: 0-100 distortion applied to the signal.
COMP sets the amount of compression applied by
range: 0-100 lowering the level threshold above which
signals are compressed, and at the same
time raising the overall level of the signal
as you increase the parameter's value.
Power Cmp3
This compressor is best for acoustic instrument sounds.
Parameter: This parameter
NS sets the threshold below which unwanted,
range: -90 to -440dB quieter sounds are cut in volume to
generate a cleaner signal.
BRIGHT adjusts the level of the signal's high-
range: 0-100 frequency content. A setting of 50 leaves
it in its original state.
TUBE sets the amount of vacuum tube-like
range: 0-100 distortion applied to the signal.
COMP sets the amount of compression applied by
range: 0-100 lowering the level threshold above which
signals are compressed, and at the same
time raising the overall level of the signal
as you increase the parameter's value.
Vocal Enh.
This effect provides a four-band EQ for clarifying a vocal signal and bringing
it forward in a mix.
Parameter: This parameter
NS sets the threshold below which unwanted
range: -90 to -440dB quieter sounds are cut in volume to
generate a cleaner signal.
TONE adjusts the level of the signal's mid-
range: 0-100 frequency content. A setting of 50 leaves
it in its original state.
BRIGHT adjusts the level of the signal's high-
range: 0-100 frequency content. A setting of 50 leaves
it in its original state.
Narration
The effect allows you to add clarity to a vocal signal, and supplies a de-esser
to suppress any sibilant ("s") sounds that are too loud.
Parameter: This parameter
NS sets the threshold below which unwanted
range: -90 to -440dB quieter sounds are cut in volume to
generate a cleaner signal.
ATTACK allows you to change the intensity of the
range: 0-100 voice.
CLARITY sets the amount of enhancer applied to
range: 0-100 the signal.
DESSER adds de-essing (sibilance reduction) as you
raise its value.
7