Makita EA7300P Operator's And Safety Manual page 29

Files and how to work with them
Sharpen using a special file holder with a saw chain round
file. Normal round files are not appropriate for this work.
See "Accessories" for the order number.
099: File the first cutter half with a 7/32" (5.5 mm) dia. round
saw-chain file, then switch to a 3/16" (4.8 mm) dia. file.
496: File the cutter with a 7/32" (5.5 mm) dia. round saw-chain
file.
The file should cut only when pushed forwards (arrow). Lift the
file when leading it backwards.
First sharpen the shortest cutter. The length of this cutter is then
the standerd for all other cutters of the chain.
New saw teeth must be filed to the exact same shape as the
used teeth, including on their running surfaces.
Always guide the file horizontally (10
The file holder makes file guidance easier. It is marked for the
correct sharpening angle of 25° (keep the marks parallel with
the chain when filing, see illustration) and limits the cut depth
to the correct 4/5 of the file diameter. See "Accessories" for the
order number.
After having sharpened the chain, the height of the depth limiter
must be checked by means of a chain gauge. See "Accessories"
for the order number.
Correct even the smallest excess height with a special flat file
(1). See "Accessories" for the order number.
Round off the front of the depth limiter (2).
to the guide bar).
°
25°
1
D
4/5
E
2
F
29