Technical Specifications - Beko  dishwasher User Manual

Technical specifications

This product complies with the following EU directives:
Development, production and sales stages of this product comply with the
safety rules included in all pertaining European Community regulations.
2006/95/EC, 2004/108/EC, 93/68/EC, IEC 60436, EN 50242
Power input
Total power consumption
Heater power consumption
Total current
(depends on the model)
Drain pump power
consumption
Water pressure
C
Technical specifications may be changed without prior notice to improve the
quality of the product.
C
Figures in this manual are schematic and may not match the product exactly.
C
Values stated on the product labels or in the documentation accompanying
it are obtained in laboratory conditions in accordance with the relevant
standards. Depending on operational and environmental conditions of the
product, these values may vary.
Note for test institutions:
Data required for performance tests shall be provided upon request. Requests
can be e-mailed to the following address:
dishwasher@standardloading.com
Do not forget to provide the code, stock and serial numbers of the product to be
tested in your request e-mail along with your contact information. Code, stock and
serial numbers of the product is located on the type label attached to the side of
the door.
220-240 V, 50 Hz
1900-2200 W
1800 W
10 A (see type plate)
30 W
0.3 –10 bar (= 3 – 100 N/cm² = 0.01-1.0 Mpa)
4 EN