Table of Contents


Quick Links

User's Manual
Document Number :
15 9265 0100_AA_BEKO_E10_EN/ 29-08-18.(14:39)


Table of Contents

Summary of Contents for Beko 8690842204784

  • Page 1 Dishwasher User’s Manual Document Number : 15 9265 0100_AA_BEKO_E10_EN/ 29-08-18.(14:39)
  • Page 2 Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
  • Page 3 Dishwasher User’s Manual Document Number : 15 9265 0100_AA_BEKO_E10_EN/ 29-08-18.(14:39)
  • Page 4 Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
  • Page 5: Table Of Contents

    CONTENTS 1 INSTRUCTIONS FOR SAFETY Adjusting the height of the upper basket ..........23 AND ENVIRONMENT Upper basket rack ......24 General safety ........4 Ceiling cutlery basket ......24 Intended use ..........4 Children’s safety ........5 5 OPERATING THE PRODUCT 25 Disposing of packaging material ..5 On/Off key ...........
  • Page 6: Instructions For Safety And Environment

    instructions for safety and environment This section contains safety Never touch the plug with • instructions that will help to get wet hands! Never unplug by protected from risk of personal pulling on the cable, always injury or property damage. Failure pull out by grabbing the plug.
  • Page 7: Children's Safety

    instructions for safety and environment Children’s safety This appliance is intended • to be used in household and Electrical products are • similar applications such as: dangerous for the children. - Staff kitchen areas in shops, Keep children away from the offices and other working product when it is in use.
  • Page 8: Compliance With Weee Directive And Disposing Of The Waste Product

    instructions for safety and environment Package information 1. Unplug the product before transporting it. Packaging materials of the 2. Remove water drainage and product are manufactured from water supply connections. recyclable materials in accordance with our National Environment 3. Drain the remaining water in Regulations.
  • Page 9: Dishwasher Overview

    Dishwasher Overview 1. Upper basket 2. Upper impeller 3. Lower impeller 4. Silverware basket 5. Door 6. Rating Label 7. Control panel 8. Detergent dispenser 9. Lower basket 10. Filters 11. Salt reservoir lid 12. Upper basket rail 13. Upper cutlery basket (depends on model) 14.
  • Page 10: Fan Drying System

    Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
  • Page 11: Installation

    Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be installed...
  • Page 12: Connection To The Drain

    Installation Permitted water temperature: up causes dirty washing. to 25°C Attach the water discharge hose to the The dishwasher may not be connected to drainpipe without bending it. Tightly fix the open warm water devices or flow-through water discharge hose to the drainpipe in water heaters.
  • Page 13: Aquasafe

    Installation Aquasafe+ The voltage and allowed fuse or • breaker protection are specified in the (depends on model) “Technical specifications” section. If the The Aquasafe+ system protects against current value of the fuse or breaker in water leaks that may occur at the hose inlet. the house is less than 16 Amps, have Water contact with the valve box of the a qualified electrician install a 16 Amp...
  • Page 14: Preparation Tips For Energy Saving

    Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy-efficient Cleaning, rinsing and drying performance of manner. your dishwasher will increase when water Wipe away any coarse food remnants on the softening system is adjusted properly.
  • Page 15 Preparation Use the test strip supplied with the product according to the steps given below to determine hardness level of your supply water. Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for...
  • Page 16: Adding Salt

    Preparation If you move your house, it is necessary to readjust water hardness level of your machine by considering the information given above according to the hardness level of the supply water in your new location. Your machine will display the most recently adjusted water hardness level.
  • Page 17: Detergent

    Preparation Push the latch to right to open the Since different salt brands in the market have different detergent dispenser lid (A). particle sizes and since the water hardness may vary, dissolution of the salt in water may take a couple of hours. Therefore, Salt Indicator remains on for a while after adding salt into the machine.
  • Page 18: Tablet Detergents

    Preparation The best washing performance in dishwashers is obtained by using detergent, rinse aid and water softening salt individually. Observe the instructions of the detergent manufacturer on the package when using tablet detergents. Contact the detergent manufacturer if your dishes are wet and/or if you notice Use powder or liquid/gel limescale spots particularly on...
  • Page 19: Rinse Aid

    Preparation Rinse aid 4. If there are stains on tableware items after washing, level must be increased The rinse aid used in and if there is a blue trace after wiping dishwashers is a special them by hand, it must be decreased. combination that aims to This is set to position 3 as factory increase drying efficiency and...
  • Page 20: Placing The Dishes Into The Dishwasher

    Preparation Placing the dishes into the dishwasher You can use your dishwasher in the optimum way with respect to energy consumption and washing and drying performance only if you place the dishes in an orderly way. Wipe away any coarse food remnants •...
  • Page 21 Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Dishwasher / User’s Manual 19 / 40 EN...
  • Page 22: Cutlery Basket

    Preparation Cutlery basket (depends on model) Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an efficient manner. Since the cutlery basket can be moved (A, B), you can create more space while placing your dishes in the lower basket and free up space for your dishes of different sizes.
  • Page 23: Collapsible Lower Basket Tines

    Preparation Collapsible lower basket Bringing the tines to the tines horizontal position by holding them from the tips may cause (depends on model) them to bend. Therefore, it will Foldable tines (A) located at the lower basket be appropriate to bring the tines of the machine are designed for an easier in the middle to horizontal or placement of large pieces such as pans,...
  • Page 24: Collapsible Upper Basket Wires

    Preparation Collapsible upper basket Upper basket multipurpose wires service rack (depends on model) (depends on model) You can use collapsible wires when you need This accessory located at the upper basket a larger space for your dishes in the upper of your machine allows you to easily wash basket of your machine.
  • Page 25: Adjusting The Height Of The Upper Basket

    Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket Hold the upper basket wires with both (depends on model) hands, slightly lift up the basket and The upper basket height adjustment simultaneously push and release the mechanism has been designed for you to latches shown in the figure (B).
  • Page 26: Upper Basket Rack

    Preparation Upper basket rack (depends on model) Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. /40 EN Dishwasher / User’s Manual...
  • Page 27: Operating The Product

    OperatIng the product On/Off Key 2. Rinse Aid Indicator 3. Programme Indicators / Water Overflow Warning (P1 Flashes) Tablet detergent function Half Load function 6. Delayed Start Key 7. Time Delay Countdown Indicator 8. Start / Pause / Cancel Key 9.
  • Page 28: On/Off Key

    OperatIng the product On/Off key When you press the On/Off key, the product that is in the On position will switch on with the Eco programme. Programme Selection / Programme Cancel key Select the programme by pressing the desired programme key. Press the Start / Pause / Cancel key for 3 seconds to cancel the running programme.
  • Page 29 OperatIng the product Dishwasher / User’s Manual 27 / 40 EN...
  • Page 30: Auxiliary Functions

    OperatIng the product Auxiliary functions Half Load function It is used to operate the machine without Washing programmes of your dishwasher loading it completely. are designed to obtain the best cleaning Load your dishes in the machine as you effect, considering the type of the soiling, like.
  • Page 31: Programming The Washing Time

    OperatIng the product Changing Warning Sound Volume Hold the delayed start key After turning on your machine, press pressed for 1 second more than and hold the Time Delay and Start / the other keys. Pause / Cancel keys respectively. Press the time delay key after selecting 2.
  • Page 32: Adjusting The Amount Of Rinse Aid

    OperatIng the product Time delay function cannot be There might be residues of set after the programme has detergent or rinse aid left in the started. machine and/or on the pieces being washed depending on the Starting the programme step in which the programme Close the door of your machine to start it has been cancelled.
  • Page 33: End Of Programme

    OperatIng the product Water Cut-off Warning If the 4th programme indicator is on, 3 doses of rinse aid will be dispensed. If mains water is cut off or water inlet tap is If the 1st, 2nd, 3rd and 4th programme turned off, the machine will not take water in indicators are on, 4 doses of rinse aid will be and water off indicator will flash.
  • Page 34: Maintenance And Cleaning

    Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in order cleaned at regular intervals. for the machine operates efficiently. Check if Unplug the product and turn off food residues are left on the filters.
  • Page 35: Cleaning The Hose Filter

    Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
  • Page 36: Cleaning The Impellers

    Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller.
  • Page 37: Troubleshooting

    Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
  • Page 38 Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
  • Page 39 Troubleshooting Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour. It will fade out after a couple of washes. •...
  • Page 40 Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
  • Page 41 Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.

This manual is also suitable for:


Table of Contents