Minolta Dynax 7xi Instruction Manual page 79

• ASZ's operation is a one-shot function; it will not set a new focal length
every time you point the camera at a new subject unless you first take the
camera away from your eye. If you use power zoom to change ASZ's
setting, ASZ will not function again until you remove the camera from your
eye and wait 30 sec.
To turn off ASZ:
1. Set the main switch to LOCK.
2. Press and hold the lens-function button on the lens barrel while you
move the main switch to ON.
• To turn ASZ on again, repeat the above steps.
77