• The mounting for the Genius main unit (this is also the phone holder) has to be done by using a mounting bracket. The Genius main unit has to be removed from the main unit holder.
Page 5
Make sure that the location in your car where you want to install your mr Handsfree Genius is free from dust and dirt. Remove the cover of the adhesive tape on the mounting bracket.
Page 6
Connecting the electrical wires for power and mute function When you want to use the cigarette plug with the curled cord, you have to insert this plug in the cigarette lighter of your car. You can also change the curled cord of the cigarette plug into the straight cord.
Page 7
• For optimum performance, the microphone should be located at least 75 cm from the Genius main unit and 40-50 cm from the driver’s mouth. Make sure that the holes of the microphone are directed towards the driver and not towards the Genius main unit.
Handsfree installation. HOW TO USE THE ANTI-THEFT SYSTEM The Genius main unit can be released from the holder. When the two buttons are pressed together, the main unit can be taken of the Genius main unit holder.
It is possible that your Please place the mr Handsfree Sometimes a high- car radio does not have Genius at least 20 cm from the frequency noise can enough RF distortions car radio. be heard in the car protection.
Page 10
• Power Adapter is damaged. • C h e c k i f t h e C i g a r e t t e • No contact between Mr Handsfree Genius lighter functions normally. the wires. does not work.
MAINTENANCE Please check following mr Handsfree maintenance TIPS to keep your kit in top condition: • Do not expose the appliance to moisture. • Always unplug the power cable when not in use. mr Handsfree wishes you a nice and safe journey!
Page 12
• During the guarantee period, the sole responsibility of mr Handsfree will be limited to repair or replace, at its option, any defective parts of the product if this is needed because of malfunction or failure under normal use and conditions.
Need help?
Do you have a question about the Genius and is the answer not in the manual?
Questions and answers