Disabling Or Enabling The Touch Pad; Connecting An External Device; Using External Display Devices - Toshiba Satellite C40 Series User Manual

66
Getting Started

Using external display devices

❖
Adjust the sensitivity of the touch pad, so that it is less
responsive to accidental light taps and lighter finger pressure.
NOTE

Disabling or enabling the touch pad

The touch pad is enabled by default. To enable/disable the touch
pad, press
touch pad" on page

Connecting an external device

NOTE
You can easily attach an external device your computer.
To do this:
1 Read the directions that came with the device to see if you first
need to install new software.
2 Connect the device's video or USB cable to the port on the
computer and to the device.
3 Connect the device's power cable to a live electrical outlet
(if applicable).
4 Turn on the external device (if applicable).
Your computer may automatically detect the external device.
Using external display devices
Your computer comes with a built-in display, but you can also
connect the following types of external display devices to the video
ports described below:
NOTE
Touch pad setting options vary by computer model. The touch pad
settings are accessible through the Mouse Properties option of the
Windows Control Panel. For more information, please visit
support.toshiba.com.
F5 . For more information, see
150.
Depending on your system, some models may include USB 3.0
port(s). To distinguish these ports, please look for the blue inset
within the USB 3.0 port (if available).
To locate your HDMI™ or RGB port, please refer to your Quick Start
document.
"Disabling or enabling the