Audiovox VODDLX10 Installation Manual page 9

10.1" overhead led backlit lcd monitor with dvd player
Hide thumbs Also See for VODDLX10:
Table of Contents

Advertisement

Trim Ring
4.
Locate the #4 x 5/16" self-tapping screw in the hardware kit.
DVD
PLAYER
5.
Using a screwdriver, install the #4 x 5/16" self-tapping screw into the location marked "B" shown in the figure below.
6.
Locate the three (3) #4 x 7 /16" self-tapping screws in the hardware kit.
TRIM
RING
ON DVD
PLAYER
7.
Using a screwdriver, install the three (3) #4 x 7 /16" self-tapping screws into the locations marked "C" shown in the figure below.
(B)
(D)
(C)
(D)
(D)
8.
Locate the five (5) M3 x 8mm screws in the hardware kit.
(D)
(D)
(C)
TRIM RING SCREW SET
(B) #4 X 5/16" SELF TAPPING SCREW
(QTY 1)
(C) #4 X 7/16" SELF TAPPING SCREW
(QTY 3)
(D) M3 X 8mm SCREW
(QTY 5)
~
~
(B)
(C)
,
(D)
9.
Using a screwdriver, install the five (5) M3 x 8mm screws into the locations marked "D" shown in the figure above.
NOTE: Use caution tightening screws as the threads may strip in the DVD Player.
8

Advertisement

Table of Contents
loading

Table of Contents