Table of Contents
Advertisement
TD-W8962ND
Click the Delete Selected button to selected entries.
For example: If you desire that the wireless station A with MAC address 00:1D:0F:11:22:33 and the
wireless station B with MAC address 00:0A:EB:00:07:5F are able to access the Modem Router, but
all the other wireless stations cannot access the Modem Router, you can configure the Wireless
MAC Address Filtering list by following these steps:
1.
Click the Enable button to enable this function.
2.
Select the radio button "Allow the stations specified by any enabled entries in the list to
access" for Filtering Rules.
3.
Delete all or disable all entries if there are any entries already.
4.
Click the Add New button.
1)
Enter the MAC address 00:1D:0F:11:22:33/00:0A:EB:00:07:5F in the MAC Address field.
2)
Enter wireless station A/B in the Description field.
3)
Select Enabled in the Status drop-down list.
4)
Click the Save button.
5)
Click the Back button.
The filtering rules that configured should be similar to the following list:
4.7.5 Wireless Advanced
Choose menu "Wireless" "Wireless Advanced", you can configure the advanced settings of
your wireless network.
Transmit Power: Here you can specify the transmit power of Modem Router. You can select
High, Middle or Low which you would like. High is the default setting and is recommended.
Beacon Interval: Enter a value between 25-1000 milliseconds for Beacon Interval here. The
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-31
47
Advertisement
Table of Contents
