Network; Wan Settings - TP-Link TD-W8962ND User Manual

TD-W8962ND

4.5 Network

Choose "Network", there are many submenus under the main menu. Click any one of them, and
you will be able to configure the corresponding function.

4.5.1 WAN Settings

Choose "Network" "WAN Settings", and you will see the WAN Port Information Table in the
screen similar to Figure 4-3, which describes the WAN port settings and the relevant manipulation
to each interface. There are five different configurations for the connection types, which are Static
IP, Dynamic IP, PPPoE, IPoA, and Bridge. You can select the corresponding types according to
your needs.
Click Add to add a new entry, you can configure the parameters for ATM and WAN Service in the
next screen (shown in Figure 4-4).
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-2
Figure 4-3
24